Title: Models for optimization of telecardiology services
1Models for optimization of telecardiology services
A.Kastania, S. Demarias, G. Loudos, E. Magos, J.
Dimakopoulos, M. Paavonen, C. Davos,
C. Boudoulas, S. Kossida Foundation for
Biomedical Research of the Academy of
Athens Bioinformatics Group Soranou Efesiou 4,
11527Athens, Greece
2(No Transcript)
3- A telecardiology service includes
- (i)real time transmission of electrocardiograms,
- (ii)transmission of cardiac images and patient
data to provide help at distance from a
specialized cardiologist in diagnosis and therapy
of cardiac diseases - (iii)provision of distance help in the therapy of
patients who have emergency cardiac diseases - (iv)information to the cardiologists who make the
referral for the results of the tests - (v)distant control and security of the biomedical
devices
4- Tele-electrocardiography
- Tele-electrocardiography extends the
capabilities of the acquisition machines of the
electrocardiograms (ECG) to allow real-time
transmission of electrocardiograms (ECGs) of a
patient using a network to an expert
cardiologist. At the expert cardiologist location
two different policies can be applied for the
normal cases patient data can be automatically
stored and for the abnormal cases patient data
can be forwarded to a distant expert
cardiological centre.
Electrocardiogram (ECG) transmission Communication
mode is real time. Patient vital data are
transmitted. Transmission rate varies from 9.6 to
384 kbps. Typical networking architectures may be
PSTN, GSM, ISDN or satellite. Equipment
requirements include PC/modem, flatbed scanner,
document camera and ECG device, or mobile phone
and ECG device.
5- Tele-echocardiography
- Echocardiography is a precious diagnostic tool
for cardiologists to determine problems of the
valves of heart. The echocardiograms can be
digitised at local places, transmitted for
evaluation in a distant medical centre or
hospital and stored using DICOM format in optical
disks. Digital networks can be combined with
portable devices, which can be used as extensions
in the stethoscopes in order to transmit heart
sounds.
6- Cardiac arrhythmias detection
- The existing techniques used to detect cardiac
arrhythmias are Holter, Rtest and telemetry. Real
time monitoring and control of cardiac
arrhythmias is feasible via provision of distant
control services using ECG sensors. - When a cardiac arrhythmia is detected a message
including the ECG signal and the related medical
images of the patient (in the interior only) is
send to the distant monitoring server. - The local system has a wireless sensor ECG and a
local computer. The distant system has a central
computer and a distant telemonitoring system (for
diagnosis and image presentation).
7- Telecardiology using sensors
8- Mobile telemedicine units
9- The telecardiology systems can be classified by
telephase and teleservice. The first
indicates the medical moment the system is
devoted to (e.g. prevention, diagnosis, therapy,
treatment) and the second refers to the offered
healthcare service (e.g. teleconsulting,
telemonitoring, telereferral).
10- In recent years, several telecardiology
applications have been successfully implemented
over wired communication technologies like POTS,
and ISDN. However, nowadays, modern wireless
telecommunication means like the GSM and GPRS and
the UMTS mobile telephony standards, as well as
satellite communications, allow the operation of
wireless telemedicine systems freeing the medical
personnel and/or the subject monitored bounded to
fixed locations.
11- Telecardiology platforms synthesis
- Some medical devices allow extraction of an
initial diagnosis for the electrocardiography
signal that is stored within them, with various
different interpretations and before its
transmission to the distant expert. The various
different users can use heterogeneous computing
platforms via the DCOM model which provides the
mechanisms for interoperability in computing
environments with different operating systems,
programming languages and network protocols.
12(No Transcript)
13- Standards to design a telecardiology model
- A number of standards' solutions may be
applicable on cardiologic biomedical devices.
European standardization efforts in computer
electrocardiography resulted to IEC
60601-2-51/AAMIEC 11 for safety and performance
requirements and to the SCP-ECG, the Standard
Communication Protocol for Computerized
electrocardiography (CEN ENV 1064 AAMI EC71) used
for the digital storage and transmission of ECG
data.
14- Standards to design a telecardiology model
- The SCP-ECG is a rigorous standard that
assures the complete information management. On
the other hand, DICOM is a standard which allows
to manage satisfactory all the types of
cardiologic exams, in particular for
echocardiography DICOM image is used for ECG and
Holter the DICOM waveform is a possible selection
and for pressure holter the DICOM SR (Structure
Reported Documents) is a solution.
15- Standards to design a telecardiology model
- The IEEE 1073 is a standard for medical device
communications that defines the entire seven
layer communications requirements for the
"Medical Information Bus" (MIB). The IEEE/MIB
standards attempt to standardize physiological
patient data and the HL-7 message protocol
attempts to create a data interchange standard
for the most common medical information managed
by a hospital information system.
16?.?. Kastania, Telemedicine models for primary
care.Stud Health Technol Inform. 200410489-98.
17?.?. Kastania, Telemedicine models for primary
care.Stud Health Technol Inform. 200410489-98.
18?.?. Kastania, Telemedicine models for primary
care.Stud Health Technol Inform. 200410489-98.
19- Optimization of a telecardiology service
incorporates quality and reliability assurance of
telemetry. A telecardiology information system
must guarantee the Quality of Services and the
capability to collect and evaluate the results of
telecare.
20(No Transcript)
21- Drawing from a widely cited 1990 IOM report, the
committee agreed that -
- Quality of Care
- is "the degree to which health care services for
individuals and populations increase the
likelihood of desired health outcomes and are
consistent with current professional knowledge"
(IOM 1990c, p. 21)
TO BE MEASURED VIA QUESTIONNAIRES DESIGN
22IN ADAPTATION PROCESS
23IS QUALITY GOOD ENOUGH?
24(No Transcript)
25- The steps for measuring software reliability are
defined by the IEEE/ANSI Standard 982.2. - Software reliability can mean different things to
different people in different situations. - Code must be reliable from the surprisingly
divergent viewpoints of software developers,
testers and users.
26(No Transcript)
27- Extended study, evaluation and implementation of
the previously mentioned models and standards is
carried out in the Foundation for Biomedical
Research, Academy of Athens in collaboration with
Intracom and Netsmart in the framework of the
Project e-Hrofilos a strategy for improvement
of quality and reliability of Telecardiology
funded by the Regional Operational Program in
Attica from National and European Union
Resources.
28Models for optimization of telecardiology services
A.Kastania, S. Demarias, G. Loudos, E. Magos, J.
Dimakopoulos, M. Paavonen, C. Davos,
C. Boudoulas, S. Kossida Foundation for
Biomedical Research of the Academy of
Athens Bioinformatics Group Soranou Efesiou 4,
11527Athens, Greece