Title: NEW PRODUCTS
1NEW PRODUCTS
2TrackVIEW
- The Vaddio TrackVIEW Camera Control System is a
presenter control system that incorporates camera
tracking and video preset camera control into one
system .
3TrackVIEW
4How does it Track me?
- Tracking is performed by the use of a reference
camera that provides a baseline image to our
Video Motion Processor - This constant image bitmap monitors any changes
to any of pixels in the bitmap - When a pixel bitmap change occurs those changes
are sent to our camera control processor which
then sends out the appropriate move command to
the camera
5Why would you use tracking and pre-set camera
control together?
- The basic system design incorporates camera
tracking into Vaddios pre-set camera control
technology. This allows the presenter to stay on
camera as they walk between pre-set video camera
shots - The net effect is that the presenter gets nice
tight pre-determined camera shots at the main
presentation areas and yet stays on camera when
they move to another area
6What Cameras can you use?
- Each TrackVIEW system comes with a Sony EVI-D70
equipped with a wide angle lens to use as the
reference camera - For the Tracking camera you can use either the
Sony EVI-D70 /EVI-D100 / BRC-300 and the Canon
VC-C50i / VC-C50iR
7Pre-set camera triggers
- StepVIEW, AutoVIEW IR, and any other type of
contact closure device can be connected to
TrackVIEW. Power for the AutoVIEW IR is now
incorporated into the system and replaces the
need for a Vaddio control expander. - ControlVIEW Xtreme/ProductionVIEW camera control
systems can be added to the system. These add
classroom control triggering to devices such as
Microphones and TouchVIEW buttons so that you can
automate student cameras into your system design
8TrackVIEW Features Motion Tracking or Preset
Tracking or Both
- The system uses motion-tracking technology with
Vaddios preset camera control technology. This
combination of technologies when on, allows the
presenter to stay on camera as they walk between
preset camera shots. - Motion tracking can be disabled providing for
only triggered preset tracking and preset
tracking can be disabled allowing for only motion
tracking.
9TrackVIEW Features First Step, Last Step and
Multi-Step Modes
- First Step - The first IR sensor or mat to be
triggered will hold the camera preset - Last Step - The last IR sensor or mat triggered
will hold the camera preset - Multi-Step - 2 mats or IR zones, or combination,
triggered concurrently triggers a user defined
3rd preset. Up to 10 presets are available for
combined pre-set configurations
10TrackVIEW Features Built-in EZCamera Cabling
System
- The system has built-in EZCable System for
running power and video over a single Cat. 5
cable. You no longer need Quick Connect Boxes to
connect the cameras to the system. - These support all Sony and Canon cameras except
when using the BRC-300 as the Tracking camera,
then the external Quick-Connect box and camera
shoe is required.
11TrackVIEW Features Tracking Camera Preset
- The tracking camera pre-set is a user definable
pre-set camera view that is activated when the
system goes into a tracking mode. This pre-set
sets the zoom and the tilt of the tracking
camera,so that when the tracking is enabled the
cameras zoom and tilt will be at a pre-assigned
position.
12TrackVIEW Features Additional Features
- RS 232 Control for AMX/Crestron
- RS 232 control port for ControlVIEW Xtreme
- IR Remote Control
- USB System Setup port
- Dual Camera Mounting system
13TrackVIEW 70 System
14TrackVIEW 70 System Integrated with ControlVIEW
Xtreme, WallVIEW, Quick-Connect 4 and MicVIEW
15 TrackVIEW 70 System Integrated with
ProductionVIEW, WallVIEW, Quick-Connect 4 and
MicVIEW
16TrackVIEW System Set-up and Software
- The system set-up port is a USB connection
which was used to eliminate the need for the
installer to find a laptop with a DB-9 RS-232
port. The system software is intuitive and easy
to use to maximize system performance and provide
for quick set-ups.
17Step 1 Set Reference Camera View
Step 2 Set Tracking Camera Left and Right Limits
Step 3 Save Tracking Camera Preset
18Step 4 Set Motion Mask
19Step 5 Start with Default Room Settings for
- Camera Tracking Speed
- Learn Rate
- Contrast
20Step 6 Use Default Advanced Settings Save
Settings
Setup Complete!
21StreamVIEW AV Server
22StreamVIEW AV Server
- Designed to provide integrators a simple way to
stream Video and Audio content from any of our
camera control systems or any other A/V device - Also designed to allow any of our Sony or Canon
cameras to become IP cameras with complete remote
web control of Camera
23StreamVIEW AV Server
- 2 ports for high and low speed streaming
- 50 site Streaming A/V Web Server with MPEG 4
video MP3 Audio - 704x480 Resolution, up to 30fps_at_704X480
- Bi-directional audio
- Three software options(included at no charge)
- Recording to hard drive with included software
- Unicast and multicast streaming
24StreamVIEW AV Server
- Integrated camera control for SONY/Canon PTZ
cameras - Remote Real time Monitoring by PC
- Pre-sets can be set by administrator
- Password protected, or direct logon
- Passwords set level of access
- Any IP support (Private/Dynamic/Global/Static)
- Net security encryption Processing against
Hacking
25StreamVIEW AV Server
26StreamVIEW A/V - Back
27(No Transcript)
28Local Site
Remote Site
ProductionVIEW.
IP Router
Broadband Modem
Customer 1
INTERNET
Broadband Modem
IP Router
StreamVIEW
IP Router
Broadband Modem
Customer 2
Speaker
Local Manager
29StreamVIEW AV SoftwareWeb Browser Viewer
- Needs no software to be loaded at remote site
- Server downloads a applet viewer in Internet
Explorer Browser - User control of video window size and audio level
- Provides access to camera control if allowed by
administrator
30StreamVIEW AV SoftwareWeb Browser Viewer
31StreamVIEW AV SoftwareA/V Communicator
- Single viewer software that is installed in PC
- DVR - Digital Video Recorder with complete
recording and playback - ADMIN Web page access
- PTZ camera control
- Scheduling
32StreamVIEW AV SoftwareA/V Communicator
33StreamVIEW AV SoftwareNVR/Network Video Recording
- Multi-Site software that allows up to 16 A/V
Servers to be viewed and/ or recorded at the same
time - Display can be configured to show 4-6-8-9-16
video windows - ADMIN Web page access
- Camera control/A/V control
- Scheduling
34StreamVIEW AV SoftwareNVR/Network Video Recording
35Canon
36Existing Products
37EZ Camera Cabling System
- Components
- Shoe
- Cat 5 cable
- Quick-Connect Box
- Quick-Connect 4
- EZ Camera Control Adapter
- Composite /or S-Video cables
- Power Supply
38Cat 5
Cat 5
39CAMERAS
- Sony EVI-D70
- WallVIEW 70 PTZ Camera
- CeilingVIEW 70 PTZ Camera
- CeilingVIEW 70 PTZ Hideaway
- Sony EVI-D100
- WallVIEW 100 PTZ Camera
- CoverVIEW enclosure available
- Sony BRC-300
- WallVIEW 300 PTZ Camera
40CAMERAS (Cont.)
- Cannon VC-C50i
- WallVIEW 50i PTZ Camera
- WallVIEW 50i PTZ Hideaway
- CoverVIEW enclosure available
- Cannon VC-50ir
- CeilingVIEW 50ir PTZ Camera
41Cat 5 Cable Distances
42Cat 5 Cable Distances
43Visualizers
- CeilingVIEW Visualizer
- CeilingVIEW Mega-Pro Visualizer
44MicVIEW
- Up to 12 microphones per MicVIEW
- Up to 8 MicVIEW units can be linked
- 24V Phantom Power
- Ports 1 2 can have Phantom Power turned off
- Ports 1 2 can be configured for line level to
accommodate wireless microphones - Instructor Priority
- Push to talk or voice activated
45(No Transcript)
46TouchVIEW
- RF Wireless Buttons
- 4 transmitter per system
- Up to 15 systems per site
47AutoVIEW StepVIEW System
- 3 mats included per system
- Control Expander included per system
- Individual mats may be ordered
- Large and small Exposed or Concealed mats
available
48AutoVIEW IR
- Active Infrared detection
- 3 IR sensors per system
- Control Expander included per system
- Sensors can be ordered separately
- Pulsing output to allow microphone override
49ControlVIEW
- Control up to 2 PTZ cameras
- Up to 12 presets
- Polycom compatible
- External control interface
50(No Transcript)
51ControlVIEW Xtreme
- Controls up to 4 PTZ cameras
- Automatic camera detection
- Supports Daisy-Chain camera configurations
- Up to 72 total presets positions assignable to
any camera - IR remote control
- External Control port
52(No Transcript)
53Vaddio/Sony Joystick Control Bundle
- Sony PTZ Camera controller
- Compatible with EZ Camera Cabling System
54ProductionVIEW
- Supports up to 6 PTZ Cameras
- Automatically detects cameras
- 12 presets per camera
- 6 logic triggers for cameras 1 2, or all 12 for
camera one - 1 logic trigger for cameras 3-6
- Manual or automatic control
- External control interface
- Field upgradeable
- 6x2 Video switcher with seamless switching
technology - Separate preview and main outputs
55- Internal LCD monitor switchable to main or
preview - Auto power off of attached cameras
- S-Video and composite inputs and outputs
- Ports 5 6 have audio follow video
56(No Transcript)
57Typical Installation
CAT 5
CAT 5