REMOVING THE RF PASS THROUGH MALE PIN

1
REMOVING THE RF PASS THROUGH MALE PIN
RAM-234-PAN1M or PAN1P

• COMPLETE THIS IF YOU HAVE DUAL RF PASS THROUGH ON
  YOUR PANASONIC CF-30

START
WWW.RAM-MOUNT.COM
mounttech_at_ram-mount.com
8410 Dallas Ave S. Seattle, WA 98198 P206-763-836
1 F 206-763-9615
2
STEP 1

• Loosen screws (3-4 turns) using Phillips drive
  screw driver.

3
STEP 2

• Pry open bracket using flat head screw driver .

4
STEP 3

• Press the male RF pin inside the dock using a
  flat object or flat head screw driver.

5
STEP 4

• Using a 6 Allen wrench loosen the top screw
  closest to the RAM sticker. Do not remove
  completely as you will drop nut into dock.
• Using the same 6 Allen wrench remove the screws
  as shown below.

6
STEP 5

• Remove cable by carefully prying open housing and
  using pliers.

7
STEP 6

• Replace plastic cap.

8
INFORMATION
If you need further technical assistance or have
a suspected warranty issue please contact us
Technical Assistance,
mounttech_at_ram-mount.com
Warranty Info,
http//www.ram-mount.com/SupportCenter/WarrantyInf
ormation/tabid/150/Default.aspx
lifewar_at_ram-mount.com