Philosophy of - PowerPoint PPT Presentation

About This Presentation
Title:

Philosophy of

Description:

This presentation does not represent company's views nor opinions ... IMHO, the concept of the design of IPv6 is; Big enough address space with simple structure ... – PowerPoint PPT presentation

Number of Views:12
Avg rating:3.0/5.0
Slides: 10
Provided by: ntt6
Category:
Tags: imho | philosophy

less

Transcript and Presenter's Notes

Title: Philosophy of


1
Philosophy of REALIPv6 network operation
  • Shin Miyakawa
  • NTT Multimedia Communications Laboratories
  • Palo Alto, California, USA
  • IPv6 summit in Osaka Japan / December 2000

2
Speakers position
  • As an IPv6 fundamentalist purposely
  • This presentation does not represent companys
    views nor opinions

3
What is the best practice to operate IPv6 network
?
  • We need to be careful about
  • Available implementation
  • Legacy
  • Standardization
  • We need to think about plans despite unclear
    situation
  • For now, the next year and few years later
  • We must have concrete philosophy.

4
Philosophy of the design
  • IMHO, the concept of the design of IPv6 is
  • Big enough address space with simple structure
  • that provides us with
  • Original End-to-End environment
  • A lot of benefits from NAT free network
  • Fast processing

It is so simple and functional enough.
5
Philosophy of the operation
  • Same as design
  • should be just SIMPLE so that its
  • IN-EXPENSIVE
  • STABLE
  • SCALABLE
  • Think simple !

6
IPv6 network operation
  • Pure IPv6 network Application Gateway(s) to
    IPv4 network is the way to go.
  • Routing protocol, E-mail, DNS etc, etc. for v6
    should be on v6.
  • Those for v4 should remain on v4.
  • dual stack operation???... I suspect...
  • Just for edge of the network only where it is
    needed.
  • We can not do this for now
  • actually we can do this if we use only KAME...
  • but anyway within few years

7
Taking care about legacy
  • Co-existence with IPv4
  • NAT hides usage of private address
  • Application GW hides usage of IPv6
  • SAMETHING! So, use IPv6 wherever NAT is needed!
  • It is painful to add new protocol onto existing
    network
  • simply avoid as much as you can
  • That is just like put new wine in old bottles
  • Create new network and move onto it
  • If you need to access legacy, use AGW

8
Operate ISP network and IX
  • Logically, we should have separate systems for v4
    and v6
  • Note that they can share same hardware and links
  • IPv6 network can simulate IPv4 network but not
    vice versa

9
Conclusion
  • To design, install and operate IPv6 network,
    lets think SIMPLE to achieve
  • IN-EXPENSIVE,
  • STABLE and
  • SCALABLE network
  • Pure IPv6 is the goal. Definitely.
  • It seems strange ? But it is!
Write a Comment
User Comments (0)
About PowerShow.com