Title: What is your fire doing
1What is your fire doing?
2Flames are easy
3Why Read Smoke?
- To determine how much fire
- To determine the location of the fire
- To help predict collapse potential
- To help PRIORITIZE Strategies Tactics
- To PROTECT Firefighters from a HOSTILE FIRE
EVENT
4What do the following things tell you about the
conditions?
- Volume of smoke
- Velocity of the smoke
- Density of the smoke
- Color of the smoke
5Lets talk flashover
6An explanation
- Normally flashover is the culmination of the fire
growth phase and occurs whenthe ceiling
temperature reaches around 900-1000F depending
on the materials present in the compartment and
the geometric arrangement. - After flashover, room temperature rapidly
increases to reach up to 1900F.
7'the rapid transition to a state of total surface
involvement in a fire of combustible materials
within a compartment'.
8Indicators
- Flames in the overhead
- Rollover
- Very high temperature which
- forces you to crouch low
- Smoke layer is banking down
9IndicatorsWhat do we do about em?
- Check the overhead!
- Cool the overhead!
- Ventilate!
10Check the overhead
- Upon entering a structure, use your TIC to
determine if there is fire/heat in the overhead.
(remember, a TIC reads surface temperature, not
ambient temp.) - Upon advancing through the structure, scan your
surroundings with your TIC (6 sided look)
11Check the overhead
- Upon entering the structure
-
- Pop the ceiling and take a look!
12- You are in a box that is filling up with
superheated gases and smoke. - The smoke is dense, black, and pressurized
causing a low visibility environment. - You see flames dancing in the smoke
- What do you do?
13Cool the overhead
- Have you heard of Pencil the ceiling? Of course
you have! - The idea is to give a short burst of water into
the overhead to allow absorption of heat, thus
reducing the temperature in the overhead.
14Cool the overhead
- We apply shorts bursts to avoid disrupting the
thermal balance. - The more surface area of water contained in your
short burst that is introduced to the
superheated atmosphere, the more heat it will
absorb.
15Cool the overhead
- Straight stream little surface area
- Fog pattern massive surface area in the
droplets of water. - Do you want to fog the overhead?
16NO!
- If you would like to avoid getting burned, stay
away from the wide fog pattern in the superheated
overhead. - Instead
- Apply your straight stream into the overhead for
penetration into the room and to allow the stream
to break up into smaller particles as it deflects
off the ceiling.
17Ventilate
- What better way to release the heat than
(properly) opening the box?
18What is this smoke telling you?
19The story has been told!
20Black Fire is the term we give to High Volume,
High Velocity, Extremely Dense, Black Smoke.It
is the sure sign of impending flashover VENT
COOL are your primary choices.
21Rollover
- .An event that is typically seen to precede
flashover by a few seconds - (Cool the Overhead)
22Access the following video for footage of rollover
- http//longbeach.granicus.com/MediaPlayer.php?publ
ish_id89
23A moderate volume of grey/brown smoke under
moderate pressure.
- Grey / Brown smoke
- The carbon particles have been filtered and
dropped as the smoke travels away from the fire
and through the structure. - Flashover not likely here.
24A moderate volume of black smoke under moderate
pressure.
- The box is filling with gases and heat.
- Probably not impending flashover, but we need to
change these conditions soon.
25Flames visible with a high volume of pressurized
dense, black smoke
- Flashover conditions likely from the corner
apartment. - What would you do?
26Non pressurized light colored smoke.
- Pay attention, watch for changing conditions as
you advance in your operations.
27Nothing is absolute!
- Pay attention to changing conditions.
- Are you experiencing improving conditions or
degrading conditions? - Look past the flames to read the story and
predict what is likely to happen next.
28Zone 3 Training