Title: Periodic and Wave Motion
1Periodic and Wave Motion
2Periodic Motion
- Any behavior which repeats itself
- Oscillatory systems of any type
- Requirements of such motion
- Inertia--mass
- Restoring force
- Equilibrium or lowest potential energy state
3Hookes Law
- Periodic motion of a mass on a spring
- Robert Hooke-who also developed an improved
microscope-stated this law - The mass-spring system meets the requirements for
periodic motion since the spring provides the
restoring force - The formula-- F -kx where k is the spring
constant - The restoring force is opposite direction of
displacement
4Example 14.2
- 14.2 A spring with constant of 9.48 N/m and a
block of mass 0.350 kg are placed horizontally.
The spring is compressed 6.0 cm and released from
rest. - (a) What is the initial acceleration of the
block? - (b) What is the initial force on the block?
- (a) Compressing the spring corresponds to x
-6.0/cm. The acceleration is then - a - k x
- m
- a -9.48 N/m (-0.060m) 1.625 m/s2
- 0.350 kg
- (b) The initial force can be found directly from
Newtons second law, - F ma (0.350 kg)(1.625 m/s2) 0.57 N
-
5Simple Harmonic Motion
- Any system whose acceleration is proportional to
negative displacement is undergoing simple
harmonic motion - In simple harmonic motion
- xx0 cos q and a-a0 cos q where q 2pt / T
- This becomes
- xx0 cos 2pt / T and
- ax-a0 cos 2pt / T which combines to
- ax-a0(x / x0)
6Simple Harmonic Motion
- Velocity is also a function of time
- vx -v0 sin 2pt / T
- Maximum velocity, acceleration, and displacement
are considered originals and are the amplitudes
of their respective quantities
7Simple Harmonic Oscillators
- If the motion obeys the formulas noted previously
the object is then a simple harmonic oscillator - To make displacement start at time t0 , an
adjustment to the angle must be used - This makes the equation
- x x0 cos(2pt/T f ) where f is the
adjustment, called the phase angle
8Example 14.3
- A metal block is hung from a spring that obeys
Hookes law. When the block is pulled down 12
cm from the equilibrium position and released
from rest, it oscillates with a period of 0.75 s
passing through the equilibrium position with a
speed of 1.0 m/s. Find displacement and velocity
at t0.28 s - xx0 cos 2pt / T (12)cos 2p (0.28/0.75) 12
cos 2.35rad - 12(-0.700) -8.4 cm
- vx -v0 sin 2pt / T -(1.0)(sin 2.35rad)
-(1.0)(0.712) - -0.71 m/s
9Homework 1
- On The Website
- 3, 5, 9, 11, 15
10Energy of Harmonic Oscillators
- From previous study, the potential energy of a
spring is ½ kx02 - When the oscillator is moving, it also develops
linear kinetic energy so that ½ mv02 ½ kx02 - In this, v0 x0 ?k/m
- The total energy must be constant
- E ½ mv2 ½ kx2 at any time
11Example 14.4
- A 3.0-kg ball is attached to a spring of
negligible mass and with a spring constant k
40N/m. The ball is displaced 0.10 m from
equilibrium and released from rest. What is the
maximum speed of the ball as it undergoes simple
harmonic motion? - Compute the maximum speed from the energy of
the system. The maximum speed occurs at x 0,
when the kinetic energy is maximum and in equal
to the initial potential energy. Then - ½ mv20
- So
- V0 x0vk/m (0.10m) v40 N/m/ 3.0 kg 0.37 m/s
12Period of a Harmonic Oscillator
- In periodic motion, v0T 2px0 so
- T 2px0/v0
- Since v0 x0 ?k/m , T 2p?m/k
- This implies that period depends only on mass and
spring constant, not on initial displacement - This period is the natural period of the system
and its inverse is the natural frequency
13Example 14.5
- A block of 2.4 kg oscillates on a spring of
constant k 26 N/m with an amplitude of 17 cm.
(a) What is the period? (b) What is the natural
frequency? (c) What is the maximum speed? (d)
What is the speed of the block 0.21 s after it
passes through its maximum position? - a) T 2p?m/k 2p?2.4/26 1.91 s
- b) f 1/T 1/1.91 0.52 Hz
- c) v0 2px0 /T 2p(0.17) / 1.91 0.56 m/s
- d) vx -v0 sin 2pt / T -(0.56)(sin
2p(0.21/1.91)) 0.36 m/s
14Pendulums and SHM
- Vibration
- Vibration is a wiggle in time
- Pendulum vibration is back and forth
- Length of time for pendulum swing is its period
- Pendulum vibration depends on length
- Does not depend on mass of object swinging or
original displacement - Depends on gravitational acceleration
- Long pendulums have long periods
- Short animals-more steps
- Tall animals-less steps
15Simple Pendulum
- Simple harmonic motion has restoring force
-mg sinq - Displacement is arc length s, where
- s Lq
- Instantaneous calculation makes
- sin q q gives F -mgq (-mg/L) s
- which is similar to F-kx
- Period is likewise similar
- T 2p?m/k gt 2p?m/ mg/L 2p?L/g
- which means it is dependent only on length and
the value of g for that place
16Example 14.7
- A grandfather clock has a pendulum
- 1.0 m long. What is its period?
- T 2p?L/g 2p?1.0/9.8 2.0 s
17Homework 2
- On The Website
- 18,21,23,25,29,35,41
18Waves from SH Motion
- If simple harmonic motion is extended into space,
it traces a sine curve - Wave is a wiggle in time and space
- High points crest Low points trough
- Height of either amplitude
- Distance between corresponding pointswavelength
? - How often vibrations occur frequency f
- Vibrations or waves per second
- Units called Hertz (s-1)
- Period inverse of frequency (1/f)
19Wave Motion
- Pulses in a rope can only be transverse,
vibrating perpendicular to wave travel - Waves transfer energy from one place to another
without moving their medium similarly - Harmonic waves are a series of continuing pulses
which have consistent period and wavelength
20Wave Type
- Transverse waves vibrate across from direction of
travel - Longitudinal waves vibrate along the direction of
travel (as in a spring)
21Wave Motion
- Displacement in direction y y0 sin
- With respect to time y y0 sin (2pt / T)
- Combining gives y y0 sin 2p ( )
- Wave speed v l / T l f
22Example 15.1
- The drawing represents two snapshots of a wave on
a rope, taken - 1/10 s apart. The wave was traveling to the
right and moved by less than one wavelength
between pictures. Find its (a) wavelength, (b)
wave speed, and (c) frequency. Maximum
displacement is 3.0 cm. - Examining the figure, the distance between two
successive crests, or the wavelength, is l 2.0m
(b) During the 1/10-s interval the wave moved to
the right a distance of half a wavelength, or 1
m. The wave speed is the distance traveled
divided by the time interval, or v 10 m/s to
the right. (c) Since we now know both wavelength
and speed, we can obtain the frequency from f
v/ l 10m/s / 2.0m 5.0 s-1 5.0 Hz.
23Sound
- OriginVibrations of a Material Object
- Vibrating source sends disturbance through
surrounding mediumDisturbance must be received
to be soundPerceived frequency of sound is
pitch Human perception Infrasonic
frequencies lower than we can perceive, lt20
Hz - Ultrasonic frequencies higher than
- we can perceive, gt20,000 Hz
24Nature of Sound and Air
- Compression -Pulse of compressed air Pressure
higher in that space - Rarefaction Disturbance in air or matter,
molecules spread outPressure is lower in the
space
25Media That Transmits Sound
- Sound waves require a medium to travel
throughThe speed of sound depends upon the
medium Higher density higher speed High
elasticity higher speed - (elasticity ability to change shape and
- return)
- The speed of sound in air also varies as the
temperature changes above 0oC vT 331.5
0.6 TC - where TC is Celsius temperature
26Sound Waves
- Longitudinal rather than transversevibrate
parallel to wave travel - Waves travel in all directions, spherically
spreading in air, thus losing energy as they
travel - Intensity is a measure of energy in sound waves
and decreases inversely with the square of the
distance from the source - I2 r12
- I1 r22
27Loudness
- Intenseness or amplitude of sound wave measured
in decibels - Each 10 dB is twice as loud and 10 times the
original sound intensity
28Example 15.3
- A loudspeaker on a tall pole standing in a
field of tall grass generates a high-frequency
sound at an intensity of 1.0 X 10-5 W/m2 at the
position of the ears of a person standing 8.0 m
directly below it. If the person walks away from
the pole so that she is 24 m from the
loudspeaker, what is the sound intensity at the
new position of her ears? - Compare the intensities at the two positions
- I2 (r12 /r22)I1 (82)/(242)(1.0 x 10-5)
- 0.11 x 10-5 W/m2
-
29Forced Vibrations
- When one vibrating object is in contact with
another, it sets the second vibrating - Tuning fork placed on a table or piano
- Sounding board in piano works by forced
vibration
30Natural Frequency
- Sound perceived when an object is struck or
dropped - Vibration frequency which requires least forced
vibration energy
31 Resonance
- Increase in amplitude when forced vibrations
equal natural frequency - Basis of tuning radio to a station
- Can cause so much forced vibration that object
falls apart
32The Doppler Effect
- Change in frequency due to motion of source or
receiver - Greater the speed of source, greater Doppler
effect Stationary bug - Bug swimming
- Blue Shift-Increase in frequency Red Shift-
Decrease in frequency
33Doppler Effect Shifts
- This effect causes a new wavelength and thus a
new frequency depending on whether the source is
approaching or receding - New frequency equation
where vs is the source speed and v is the speed
of wave This also works for light, as noted
previously
34Doppler Effect
- The equation is different for an observer moving
with respect to the source
where vo is observer speed This equation is used
in law enforcement of speed laws
35Doppler Effect
- What if both source and observer are moving? It
takes a little logic to figure the signs, but the
equation is just a combination
36Examples 15.6 15.7
- A police car horn emits a 250-Hz tone when
sitting still. What frequency does a stationary
observer hear if the police car sounds its horn
while approaching at a speed of 27.0 m/s (60
mi/h)? What frequency is heard if the horn is
sounded as the car is leaving at 27.0 m/s? - f 272 Hz gives the
apparent frequency for the -
approaching car. - f 232 Hz gives the
frequency as the car passes - If the police car mentioned above were sounding
its horn while stationary, what frequency would
be heard by an observer who was approaching it at
a speed of 27.0 m/s (60 mi/h)? - In this case, the observer is moving toward a
stationary source. Therefore - f
-
- f 270 Hz
37Bow waves
- An additional Doppler effect when the source is
moving at or above wave speed on surface of the
medium - V-shaped pattern made by overlapping crests
38Shock Waves
- Produced when source is within the medium,
three-dimensional cone shaped - Sonic boom sharp crack heard when conical
shell of compressed air that sweeps behind a
supersonic aircraft reaches listeners on the
ground below.
39Homework 3
- p437 34,35
- p476 ff 4, 6, 18
40Reflection of Wave Pulses
- When a wave reaches the end of its medium, it is
reflected - The way it is reflected depends on whether the
end is fixed or free to move - Newtons 3rd law determines the direction of the
reflected wave pulse - Fixedrope pulls up on wall, wall pulls down on
string, creating reversed pulse - Freemotion simply continues in opposite
direction, with no reversal
41Standing Waves
- Occurs when a wave reflects upon itself and
interference causes the pattern - Nodes remain stationary Anti nodes-occur half
way between nodes
42Principle of Superposition
- Standing waves get their shape due to the
principle of superposition - At any instant, the resultant combination of the
intersection of two waves is the algebraic sum of
the components of both(or all) waves - The sum is then the basis for constructive and
destructive interference
43Standing Waves
Change the frequency in a standing wave and more
nodes/antinodes appear in the event
44Standing Waves and Harmonics in Strings
- The lowest resonant frequency of a string (one
loop) is the fundamental frequency - Resonant frequencies which are whole number
multiples of the fundamental are harmonic
frequencies overtones are any multiple of the
fundamental - Harmonics in a standing wave make more loops in
the string
45Standing Waves in Strings
- In a string, the points which do not vibrate are
called nodes . The ends are counted as well as
nodes in between - The points of greatest amplitude are called
antinodes - The fundamental frequency can be calculated
- f v / l v / 2L where L is string length
- and v is velocity of the wave
- in the string
- Other relationships resonant wavelengths ln
2L/n - where n 1,2,3,4,.
- fn v / ln n v / 2L
- v where T is the tension and
- m is the linear density
- This makes fn n /2L ? T/m
46Example 15.8
- What is the fundamental frequency of a guitar
string whose tension is adjusted to give a wave
speed of 143 m/s if the length of string free to
vibrate is 0.65 m? - The fundamental wavelength of a string fixed
on both ends is twice the length of the string.
The frequency is found from the ratio of sound
speed to wavelength. We set n 1 for the
fundamental frequency. - f
110 Hz
47Waves in a Vibrating Column of Air
- In an open end pipe, waves vibrate in a similar
fashion to a string, except that there is no node
at the ends, only within the pipe - The equations for frequency and wavelength are
the same as in a string - In a pipe closed at one end, a node is made there
and no other node at the fundamental. The
wavelength is therefore 4 times the length of the
pipe. Closed pipes always have a lower frequency
than open pipes. In addition, only odd-numbered
harmonics are possible. Equations are similar,
but with 4L rather than 2L.
48Example 15.9
- The second overtone of standing waves in a pipe
closed at one end is 512 Hz. How long is
the pipe? - The fundamental resonant wavelength of a pipe
closed at one end is four times the length of the
pipe. For such a pipe, only odd harmonics occur.
The second overtone in such a series is the
fifth harmonic, which has a wavelength -
- The frequency of the second overtone is
-
-
- Solving for L, we have
49Beats and Interference
- Beats occur when two closely tuned but not
identical notes are sounded together - These beats occur due to interference between the
frequencies - The beat frequency can be calculated by the
formula fB f1- f2 - Beats of less than 10 Hz can be distinguished
easily, above that with much difficulty
50Homework 4
- p477ff 19, 28, 29, 38, 39
51Important Formulas