How to tie the shortest shoelace

1

• How to tie the shortest shoelace?

TANJONG KATONG GIRLS SCHOOL Cho Soo Min
(Secondary 2E7 / 3E8) Tay Wen Niang Sheryl
(Secondary 2E7 / 3E8) Kwok Wai Sze (Secondary 2E7
/ 3E9)
2
Aim

• To find various lacing methods that are commonly
  used by people
• To find the shortest lacing method

3
Literature Review

• Criss-cross, or the bow-tie? There were
  different opinions.
• It turns out, however, that shorter lacings are
  possible if the lace doesn't have to pass
  alternately through the eyelets on the left and
  right side of the shoe.

4
Criteria

• We found out the minimum criteria for a
  safe-to-use method.
• The shoelace must go through all the holes of the
  shoe.
• The shoelace need to go from one side to the
  other at least for five times.

5

• Before showing the lacing methods, here are some
  of the points to be taken note of
• Regard the thickness of the shoelace be 0 cm
• There will not be any twisting of the shoelace
• Consider the length used to tie the knot would be
  same for all the methods.

6

• Let the distance between the holes be

7
Methodology

• Use algorithms to find the shortest lacing
  method.
• Form a formula for each lacing methods and
  substitute numbers.
• Create a shorter lacing method if possible

8
a) Algorithms

• What is algorithm?
• An algorithm is a specific set of instructions
  for carrying out a procedure or solving a
  problem, usually with the requirement that the
  procedure terminate at some point.
• There are many types of algorithms, and some of
  them can be used to find the shortest route in a
  specified area.
• Finding shortest lacing method could be regarded
  as a limited version of salesman problem, where
  we have to find the shortest route (in this case,
  lacing method). Thus, we went on investigating
  different algorithms that could suit our project.

9
a) Algorithms
10
Remarks

• After judging each of the algorithms, we realized
  that none of them suits our project, as they will
  produce a route (in this case, lacing method)
  that does not suit our criteria - not going from
  one side to the other at least for five times.

11
b) Form a formula for each lacing methods and
substitute numbers.
First of all, we chose the model shoe so that we
can substitute in the numbers.
Figure 1.1 The model shoe
12
Straight European Method
Length used 5h 2d 4(vh2 4v2
)(Pythagoras Theorem) 5 x 5 2 x 5.3852 4 x
6.4031 61.4 cm (3 s.f.)
13
Lattice Lacing
Length used h 4v 6 (vh2 9v2 )(Pythagoras
Theorem) 1 x 5 4 x 2 6 x 7.8102 59.9 cm
(3 s.f.)
14
Sawtooth Lacing
Length used 5h 2v 4(vh2 4v2 )(Pythagoras
Theorem) 5 x 5 2 x 2 4 x 6.4031 54.6 cm
(3s.f.)
15
Which method uses the least amount of shoelace?
16
Substituting different measurementsLet h 4
cm, v 1.5 cm, d v42 1.52(Pythagoras)
4.2720 cm (5 s.f.)
17
Substituting different measurementsLet h 6
cm, v 2 cm, d v62 22(Pythagoras) 6.3246
cm (5 s.f.)
18
Substituting different measurementsLet h 5
cm, v 1.5 cm, d v52 1.52(Pythagoras)
5.2202 cm (5 s.f.)
19
Substituting different measurementsLet h 5.5
cm, v 2 cm, d v5.52 22(Pythagoras)
5.8523 cm (5 s.f.)
20
Substituting different measurementsLet h 4
cm, v 1 cm, d v42 12(Pythagoras) 4.1231
cm (5 s.f.)
21
Result analysis

• For all our results, the bow-tie method was still
  the shortest method. Thus, it is safe to say that
  the bow-tie method is more or less the shortest
  lacing method.
• However, as some of the results changed, one
  should know the dimensions of the shoe before
  working out the formulae to find the shortest
  method as the result might vary.

22
c) Create a shorter lacing method

• Is it possible to create a shorter lacing method?
• So far, we have found that the bow-tie method is
  the shortest lacing method.

Thus, we would have to first see if we Can
minimize the length used in the bow-tie Method.
23
Is it possible to minimize the length used by
the bow-tie method?

• Properties of bow-tie method
• Bow-tie method goes through all the holes.
• It goes from one side to the other for exactly 5
  times without overlapping even once.

Bow-tie method
24
Is it possible to minimize the length used by
the bow-tie method?
Figure 1. Bow-tie method
Figure 2. Shortened Bow-tie method
25
Conclusion

• The length of the shoelace differs very much
  depending on which lacing method you are using,
  and the shoe shop method, which many shoe shops
  are using because it is regarded as the fastest
  way, actually is one of the longest lacing
  methods.

26
The shortest lacing method is the bow-tie method
no matter what size of the shoe is.
27
Recommendation

• one should use the bow-tie method if he / she
• has limited length of shoelace
• wants to shorten the shoelace to
• save the material

28
dress with ribbons- joining two materials
together by punching holes and tying -
packaging and tying (help the factories in
packaging their products and cutting down on
their costs, especially since the current
Economic crisis.
Application
29
Reference

• Ian W. Fieggen (2003 2008)
• Ivars Peterson (1999)
• Burkard Polster (2006)
• Burkard Polser (2002) Nature What is the best
  way to tie shoelace? (Dec 2002 Nature)
• RANDY LEWIS (1986) Search for Perfect Shoelace
  Ties Him Up
• HOLLIS W FIELD (1910) One Reason Why Men Go
  Insane Shoe Laces Made Extra Short.
• Curet, William D. (2007)
• Smith, Gregory S. (2007)
• James M. Parks Solving Geometry Problems in
  Everyday Life
• Wonder-how-to www.wonderhowto.com
• Ivars Peterson (2002) Five-Suit Decks,
  Traffic-Jam Puzzles, and Other Treats