Title: February 16, 2005
1Planetary Protection All of the Planets, All of
the Time
February 16, 2005
2Planetary Protection
- Objective
- Protect the scientific integrity of other solar
system bodies for future discovery of life,
remnants of past life, and the precursors of life
(forward contamination) - Protect the Earth from possible hazards of
returned extraterrestrial material (back
contamination) - Project responsibility
- Failure to comply with PP requirements can result
in launch prohibition
3Microbial Life Abounds on Earth
- Microbial world accounts for all known life forms
for nearly 90 of the Earths history - They are everywhere
- 109 cells/g typical soil sample
- 106 cells/ml in open ocean
- Have helped shape our search for extraterrestrial
life - Earth microbes have been observed to thrive in
extreme environments (extremophiles) - Sulfur oxidizing bacteria found in mid-ocean
vents (500 C) - Psychrophiles in Antartic dry valleys (0 C)
- Halophiles in salt ponds
- Acidophiles in Rio Tinto, Spain (pH 2)
- Demococcus radiodurans thrive in extreme radiation
4Planetary Protection vs. Contamination Control
- Contamination control
- Particulate and molecular contamination on flight
systems to ensure payload instruments proper
function - CC requirements derived from science requirements
- Planetary Protection (forward contamination)
- Requirements levied by NASA for benefit of
present and/or future science - Biological and organic contamination control on
all flight hardware that reaches another planet - Some overlap, but not all methodologies in common
5Historical Perspective
- 1958 National Academy of Sciences forms Space
Science Board - SSB calls for the conduct of planetary
exploration in a fashion which ... prevents
contamination of celestial objects... - 1963 On basis of SSB input, NASA adopts
following policy - Lunar spacecraft will reduce microbial load to a
minimum through the use of assembly and check out
in clean rooms and the application of surface
sterilants after final assembly and check out
Mars flights will have less than a 10-4
probability of hitting the planet, while landers
will be sterilized after complete assembly and
checkout Venus flights will have less than 10-2
probability of hitting the planet. - 1964 COSPAR adopts following policy
- 10-4 or less for viable organism on lander or
probe (anywhere!) and accidental impact by
unsterilized flyby or orbiter lt 3x10-5 - 1967 International Treaty signed by U.S.
- MOON TREATY - States parties to the treaty shall
pursue studies of outer space... so as to avoid
their harmful contamination and also adverse
changes in the environment of the Earth... - 1967 NASA PP Policy adopts COSPAR resolution
- NASA first version of 8020.7 and 8020.12
6COSPAR PP Mission Constraints
- Depend on the nature of the mission and the
target planet - Assignment of categories for each specific
mission/body - Specific measures regarding
- Spacecraft operating procedures
- Spacecraft organic inventory
- Handling of returned samples
- Spacecraft trajectories and materials
- Intentional and unintentional deposition of Earth
organisms on other solar system bodies - End of mission disposition of spacecraft and its
components
7NASA PP Policy
- The conduct of scientific investigations of
possible extraterrestrial life forms, precursors,
and remnants may not be jeopardized. In addition,
the Earth must be protected from the potential
hazards posed by extraterrestrial sources.
Therefore, for certain space-mission/target-planet
combinations, controls on organic and biological
contaminations carried by spacecraft shall be
imposed. - Planetary Protection Officer
- Prescribe standards, guidelines and procedures
- Conduct reviews
- Certify compliance
- PP policy does not apply to
- Earth orbiting missions
- Lunar missions
- Human missions
8Governing Documents
- NASA Policy Directive 8020.12B Planetary
Protection Provisions for Robotic
Extraterrestrial Missions - Defines PP mission categories
- Details PP requirements
- Establishes schedules and documentation for
reviews - Include PP parameter specifications
- NASA Policy Directive 5340.1C NASA Standard
Procedures for the Microbial Examination of Space
Hardware - Defines specific procedures for the microbial
examination of space hardware and associated
environments
9Mission Categories
10Example Mission Categorizations
- Category I Any mission type to Sun or Mercury
- Category II Any mission type to Venus, Jupiter,
Saturn, Uranus, Neptune, Pluto, outer planet
satellites (except Europa), comets, asteroids - Category III Fly-bys or Orbiters to Mars,
Europa - Category IV Landers or Probes to Mars or Europa
- Cat. IVa Without life-detection experiments
- Cat. IVb With life-detection experiments
- Category V Earth return from any
extraterrestrial solar system body (except the
Moon) - Restricted Earth return
- Unrestricted Earth return
11Planetary Protection Categorizations
12Scope of Work
- Categories I and II
- Little cost or risk, technically simple, but
expert assistance needed - Categories III and IVa
- Significant costs and risks, technically
difficult - Implementation methods and required tasks cross
several areas of typical Project WBS - Categories IVb and V restricted Earth return
- Great costs and risks, technically challenging
13Project Implementation
- Planning
- PP Plan, Subsidiary Plans
- Cuts across mission and flight systems
- Managed like any other project resource
- Planned, tracked, margined
- Analysis
- Bacterial burden accounting
- Biological contamination control
- Reports and reviews, documentation
14Category III Requirements for Mars
- Orbiter missions can either choose to achieve
bioburden levels equivalent to Viking pre-flight
sterilization total bioburden (5 x 105 spores) - OR
- Meet the following orbital lifetime requirements
- 20 years after launch at gt 99 probability and
- 50 years after launch at gt 95 probability
15Category IV A/B Requirements for Mars
- Categories IVA
- Lander systems not carrying instruments for the
investigation of extant life are restricted to a
biological burden no greater than Viking lander
(3 x 105 spores) pre-sterilization levels - Category IVB
- Lander systems designed to investigate extant
life are required to meet the requirements of
Category IVA, plus - The entire landed system must be sterilized at
least to Viking post-sterilization biological
burden levels or to levels of biological burden
reduction driven by the nature and sensitivity of
the particular life-detection experiment,
whichever are more stringent - Or
- The subsystems which are involved in the
acquisition, delivery and analysis of samples
used for life detection must be sterilized to
these levels and a method of preventing
recontamination of the sterilized subsystems and
the contamination of the material to be analyzed
is in place
16Mars Category IVA PP Burden Requirements
- Maximum value for exposed external and internal
surfaces is 3 x 105 spores and a max average
density of 300 spores/m2 - Values at launch (no allowance for inflight
environments or surface conditions) per lander
system or landing event - Assay per Viking standards or demonstrated
equivalence
17Category IV Implementation
- Implementing Procedures
- Trajectory biasing
- Clean room assembly
- Selected microbial reduction
- Organics inventory and archive
- Documentation
- PP Plan
- Pre-launch PP report
- Post-launch PP report
- End of mission report
- Subsidiary plans
18Approaches for Hardware Design
- Design for tolerance to assays
- Design for cleaning
- Smooth surfaces
- Accessibility before closeout
- Minimize accountable surfaces with HEPA filters
or sealing - Average encapsulated microbial density is 130 per
cm-3 for all non-metallic volumes - HEPA filters capable of removing 99.97 of all
particles greater than 3x10-7 m in size - Design for microbial reductions
- Heat tolerance (125 C for 50 hours)
- Especially important for impacting hardware with
encapsulated spore burden rules - Design for recontamination prevention
19Common PP Procedures
- Alcohol wipes (exterior surfaces) Isopropyl or
ethyl alcohol swabbing. Not applicable to
interior and encased surfaces which are
inaccessible - Dry heat 105-180 C for 1 to 300 hours. Viking
performed DHMR at 111.7 C for 30 hours and was
credited with a bioload reduction factor of 104.
Problems caused by thermomechanical
incompatibility with this environment (typically
for electrical components). - Radiation Typically 2.5 Mrad of gamma radiation.
Problems encountered include optical changes in
instrumentation and damage to solar cells,
electronics - Hydrogen peroxide Only applicable to exposed
surfaces
20Time/Temperature for Sterilization
- Short time/temperature conditions at which all
terrestrial organisms associated with spacecraft
hardware will be eradicated - 500 C for 0.5 sec
- Applies to exposed, mated and encapsulated burden
- Typically used for heatshield surfaces
21Cost
- PP implementation must be well planned and
managed - Costs increase with mission categorization
- Mars Category IV-A missions typically spend 1 of
total project budget on planetary protection - Category IV-B missions will spend much more,
perhaps 5
22References
- Planetary Protection Policies and Practices
Course Notes, Nov-03. - NPD 8020.7E Biological Contamination Control for
Outbound and Inbound Planetary Spacecraft, Feb-99 - NPG 8020.12B Planetary Protection Provisions for
Robotic Extraterrestrial Missions, Apr-199 - NPG 5340.1D NASA Standard Procedures for the
Microbial Examination of Space Hardware, Jan-00 - Preventing Forward Contamination of Europa,
National Academy of Sciences SSB, 2000,
http//www7.nationalacademies.org/ssb/europamenu.h
tml - Europa Orbiter Preliminary PP Requirements,
Apr-99 - JPL Project Managers Training, 2002.
- JPL reference site http//planpro.jpl.nasa.gov/in
dex.htm - PP Bibliography http//dcypser.tripod.com/pp/plan
etpr.html - Astrobiology Web http//www.astrobiology.com/prot
ection.html - Summary article by John Rummel and Michael Meyer
http//calspace.ucsd.edu/marsnow/library/mars_expl
oration/robotic_missions/landers/sample_return/pla
netary_protection1.html