Elasticity - PowerPoint PPT Presentation

1 / 28
About This Presentation
Title:

Elasticity

Description:

Elasticity. Elasticity is more general than structural mechanics. ... is the biaxial modulus. Biaxial Loading. Anisotropic Materials ... – PowerPoint PPT presentation

Number of Views:32
Avg rating:3.0/5.0
Slides: 29
Provided by: GAd99
Category:

less

Transcript and Presenter's Notes

Title: Elasticity


1
  • Elasticity
  • Elasticity is more general than structural
    mechanics.
  • No restrictions on relative dimensions of
    bodies.
  • No restrictions on loading.
  • Bodies remain in the linear elastic region of
    the stress-strain curve ?xE?x.

2
Isotropic Stress-Strain Relations
E2G(1?)
3
Relations Among the Elastic Constants
R. Reismann and P.S. Pawlik, Elasticity Theory
and Practice, Robert E. Krieger Publishing
Company , 1991
4
Uniaxial Loading
5
Anisotropic Materials
6
Cubic Material (Single Crystal Silicon)
  • There are 3 independent elastic constants C11,
    C12, C44
  • For silicon C11 166 GPa, C12 64 GPa, C44 80
    GPa
  • Appendix C
  • where l1, l2, l3 are the direction cosines of
    the angle between the direction of interest and
    the x,y,z directions respectively, e.g.
    l1cos(x,dir).

7
  • For Poissons ratio
  • where the (l1, l2, l3) and (m1, m2, m3) are the
    direction cosines defining two perpendicular are
    the directions.

8
Thermal Expansion
9
Thermal Actuator
Micromechanical Switch
http//www-g.eng.cam.ac.uk/edm/images/research/mem
s/thermal_actuators_1.jpg
10
Amplified Thermomechanical In-Plane Microactuator
(ATIM)
11
(No Transcript)
12
Bending T-MEMS
Patricia Nieva, MS Thesis, Northeastern
University 1999
13
SEM micrographs of a bending T-MEMS thermometer
array successfully fabricated with a 0.5 mm
silicon oxide bottom layer and a 0.5 mm nitride
top layer
14
SEM micrographs bending T-MEMS thermometer array
successfully fabricated with a 1 ?m SiO2 bottom
layer and a 7500 Å polysilicon top layer
15
Breaking TMEMS
16
Breaking TMEMS Array
17
SEM micrograph of a breaking T-MEMS thermometer
array of shape 3 after fabrication and before
heating
18
SEM of a breaking T-MEMS thermometer array heated
to 1100 ?C. Brittle fracture at the neck can be
clearly observed
19
(No Transcript)
20
General Stress-Strain with Thermal Effects
21
(No Transcript)
22
Residual Stresses
23
P.J. Ryan, G.G. Adams, N.E. McGruer, Journal of
Applied Mechanics, 75, 031008
24
Stress-Gradient

Mr
25
(No Transcript)
26
(No Transcript)
27
Sources of Residual Stress
  • Thermal mismatch
  • Chemical reactions far from equilibrium
  • Oxidation of silicon
  • LPCVD deposition of silicon nitride
  • Rapid deposition processes
  • Sputtering
  • Evaporation

28
Limit of Elasticity
Write a Comment
User Comments (0)
About PowerShow.com