The Third Generation Personal Communication Systems: Research - PowerPoint PPT Presentation

1 / 21
About This Presentation
Title:

The Third Generation Personal Communication Systems: Research

Description:

PCS aim to provide users wireless access to existing communication networks ... 1G Systems: TACS, AMPS, NTT. 2G Systems: GSM, IS-136, IS-95, PDC, PHC ... – PowerPoint PPT presentation

Number of Views:42
Avg rating:3.0/5.0
Slides: 22
Provided by: comu9
Category:

less

Transcript and Presenter's Notes

Title: The Third Generation Personal Communication Systems: Research


1
The Third Generation Personal Communication
SystemsResearch Development
  • Hong Nie
  • Hongn_at_ece.ubc.ca
  • Electrical Computer Engineering
  • University of British Columbia

2
Order of Presentation
  • First and second generation of personal
    communication systems
  • Requirements for third generation systems
  • Technical aims of IMT-2000
  • Basic concepts of CDMA
  • Performance enhancement features in IMT-2000
  • Radio transmission technology proposals for
    IMT-2000
  • Comparison of W-CDMA and CDMA2000
  • Time schedules for IMT-2000

3
Personal Communication Systems (PCS)
  • PCS aim to provide users wireless access to
    existing communication networks instantly at any
    time, anyplace.
  • 1G Systems TACS, AMPS, NTT
  • 2G Systems GSM, IS-136, IS-95, PDC, PHC
  • Serious limitations of 1G and 2G Systems
  • - Low transmission rate, e.g., 9.6 kbps for GSM
  • - Unable to support mobile multimedia
    applications.

4
Requirements for 3G Systems
  • More Advanced Services
  • - Computer data with Internet access e-mail,
    real-time image transfer, multimedia document
    transfer, mobile computing
  • - Telecommunications with mobility
    videoconferencing, video telephony
  • - Audio/video content video on demand,
    interactive video service, electronic newspaper,
    teleshopping
  • Better Quality of Service
  • - Larger data transmission throughput and lower
    delay
  • - Global roaming
  • - Voice quality comparable to wireline systems

5
Requirements for 3G Systems (Continue)
  • Flexibility
  • - Multiple environments
  • - Bandwidth on demand
  • - Modulation and multiple access selection
  • - Inter and intra system hand over
  • Ability to Migrate and Evolve
  • - Coexistence with 2G systems
  • - Evolution from 2G to 3G

6
Technical Aims of International Mobile
Telecommunications 2000 (IMT-2000)
  • Support of a wide range of transmission rate
  • Up to 144 kbps for vehicular, 384 kbps for
    pedestrian in outdoor, and 2 Mbps in indoor and
    picocell environments.
  • Support of both circuit-switched and
    package-oriented services.
  • Support of both symmetric and asymmetric traffic.
  • Support of soft hand over

7
Multiple Access SchemesFrequency Division
Multiple Access (FDMA),Time Division Multiple
Access (TDMA), Code Division Multiple Access
(CDMA)
8
Principle of CDMA
9
Advantages of CDMA
  • Higher spectral efficiency
  • At least four times over digital TDMA or FDMA,
    and twenty time over analog FM/FDMA
  • Protection against mulitpath interference
  • Support of variable transmission rate
  • Interference rejection
  • Privacy

10
Performance Enhancement Featuresin IMT-2000
  • Smart Antenna
  • - Multiple antennas allow the formation of beams
    towards the desired signal and nulls towards
    interferers, hence enhance signal quality and
    reduce interference.
  • - The pilot symbols inserted both on the
    downlink and uplink make the use of adaptive
    antennas more feasible.

11
Performance Enhancement Featuresin IMT-2000
(Continue)
  • Multi-User Detection
  • - Single use detection schemes treat
    interference as noise hence degrade performance
    as the number of interferers increases.
  • - Multi-user detection detects both the desired
    signals and interference, hence improves the
    performance of recevier.

12
Performance Enhancement Featuresin IMT-2000
(Continue)
  • Transmit Diversity
  • - In order to meet IMT-2000s stringent
    detection requirements in all environments,
    antenna diversity is indispensable.
  • - Receiver diversity at mobile stations may not
    be feasible.
  • - Using transmit diversity at base station can
    improve mobile station receiver performance.

13
Performance Enhancement Featuresin IMT-2000
(Continue)
  • Software Defined Radio
  • - Conventional radio receiver is dedicated to an
    individual radio standard and optimized for that
    particular standard.
  • - Software defined radio receiver digitizes
    signals with wideband analog-to-digital converter
    and implements most receiver functionalities with
    software re-configurable or parameterizable
    digital device.
  • - The inherent flexibility of software defined
    radio can well satisfy the demanding requirements
    of IMT-2000 to provide multi-standards and
    multimedia services.

14
Radio Transmission Technology Proposals for
IMT-2000I. W-CDMA
  • Proposed by Third Generation Partnership Project
    (3GPP)
  • Europe European Telecommunications Standards
    Institute (ETSI)
  • Japan Association of Radio Industries Businesses
    (ARIB) and Telecommunication Technology Committee
    (TTC)
  • USA T1P1
  • Korea Telecommunications Technology Association
    (TTA)

15
Radio Transmission Technology Proposals for
IMT-2000II. CDMA2000
  • Proposed by Third Generation Partnership Project
    II (3GPP2)
  • USA Telecommunications Industry Association
    (TIA)
  • Korea Telecommunications Technology Association
    (TTA)
  • Strongly endorsed by Qualcomm and Ericsson

16
Radio Transmission Technology Proposals for
IMT-2000III. TD-SCDMA IV. W-TDMA
  • Time Division Synchronous CDMA is proposed by
    Chinese Academy of Telecommunications Technology
  • Wideband TDMA (EDGE) is proposed by
    Telecommunications Industry Association (TIA)

17
Similarities between W-CDMA and CDMA2000
  • Coherent forward and reverse link
  • Fast power control both on forward link and
    reverse link
  • Variable length orthogonal Walsh sequences for
    forward link channelization
  • Complex QPSK spreading on both forward and
    reverse link
  • Convolutional codes used as baseline (identical
    polynomials)
  • Parallel Turbo code for higher data rates

18
Similarities between W-CDMA and CDMA2000
(Continue)
  • Variable spreading factor to achieve higher data
    rate
  • Orthogonal Walsh sequences to separate the
    parallel channels of users on the reverse link
  • Non orthogonal reverse link based on PN
    scrambling codes
  • Mobile assisted inter-frequency hard handoff
    procedures and intra-frequency soft handoff
    procedures
  • Variable rate operation with blind rate
    estimation for simple services (e.g. voice)
  • Continuous reverse link operation

19
Major Differences between CDMA2000 and W-CDMA
20
Major Differences between CDMA2000 and W-CDMA
(Continue)
21
Time Schedules for IMT-2000
  • Radio transmission technology proposals
  • - June 30, 1998
  • Proposal Evaluations
  • - Fall 1998
  • Consensus building and final selection
  • - March 1999 (The agreement in Fortaleza,
    Brazil)
  • Detailed finalized technical specifications
  • - January 2000
  • Commercial Deployment
  • - Year 2001-2004
  • - May 2001, NTT DoCoMo
Write a Comment
User Comments (0)
About PowerShow.com