Diapositive 1

1
Info 32
Stainless steel enclosures made from AISI304 have
been changed to AISI304L.
To improve the quality and resistance against
corrosion.
Reason
54902 to 54980
References
Now
Availability
Info 33
Sarel offers now a complete range of stainless
steel plinths for floor standing enclosures S6000
S18500.
To complete the offer with all needed dimensions.
Reason
See the blue references in the table below
References
On demand
Availability
1
2
Info 34
Complete range of stainless steel 304L canopies.
To complete the offer.
Reason
See the new blue references
References
On stock
Availability
Info 35
Removal of the safety enclosures from the offer,
but offering a solution with S3D range
To offer the same quality as S3D range
Reason
Removed 54614 to 54664
References
Using the new accessory 51370 to transform a S3D
enclosure to safety version
New solution
New reference 51370 is already on stock
Availability
2
3
Info 36
Sarel offers the EMC cover kits to equip and
upgrade the standard fan to EMC.
To cover the market needs in this type of fans.
Reason
See table below
References
On stock
Availability
Info 37
Addition of the power connection cable to fans.
Also created separately as spare part.
To complete the offer Safety, fast, practical
and easy handling.
Reason
If to order separately, then 87989.
References
New cable available on stock
Availability
Info 38
Modification of the fixing of VDI cabling racks
to the pallets.
Safety, practical and easy handling.
Reason
All cabling racks.
References
Now
Availability
3
4
Info 39
New accessories for the 19 swing frames.
To complete the offer.
Reason
accessories 64323, 64324, 64325, 64326, 64391
References
Flat handle
64323
Rear cable guide support
64324 160 depth 64325 260 depth
Double bar insert 5mm
64326
120 door stay
64391
On stock
Availability
4
5
Info 40
Improvement of the hinges of Thalassa plastic
boxes
Reinforcement through additional insert to put
inside the corners.
Reason
08191 08192
References
new insert
hinges
Now
Availability
Info 41
Rectification of info concerning safety metal
boxes This product range has a mechanical
resistance of IK07 and not IK09 as mentioned in
our catalogues !
24310, 24311, 24320, 24321, 24340, 24341, 24510,
24511, 24512, 24520, 24521, 24522, 24540, 24541,
24542.
References
5
6
Info 42
Set of guides for the side entry of the plain
chassis to S6000 enclosures.
Allows to benefit from all the width of the
enclosures. The equipment installed on the
chassis can be mounted and wired outside of the
cubicle. It is not necessary to use the
intermediate chassis. This system allows also to
install chassis of smaller widths , leaving free
space in one or both sides to mount vertical bus
bars or other accessories.
Reason
These sets of guides are available for cubicles
of 500 mm ( ref. 63983 ), 600 mm ( ref. 63984 )
and 800 mm width ( ref. 63985 ).The joining of
chassis is done with the help of the coupling kit
63986All needed brackets and rails are
included in the sets.
References
Coupling kit ref. 63986
6
7
Info 43
New accessory for S3D range cable gland plates
for membranes.
To complete the offer
Reason
7 references of plates with cut-out for membrane
or for FL21 entries2 references of plates with
mounted membranesSee table below
References
On stock
Availability
7
8
Info 44
New power distribution rails
To improve the functionality of this range -
Increase of the length of the connection cable to
3 m - New fitted safety bipolar green switch
Reason
The new switch protects the installation against
short circuit.The green light indicates the good
performance of the installation.The longer cable
provides more possibilities of connection.
Advantages
References
No change in references 11289 to 11848
On stock
Availability
Before
After
8
9
Info 45
New product Tele-Report kit for Thalassa floor
standing enclosures
For energy and Infrastructure markets and for
applications like High consumer metering, public
lighting metering, traffic lights and
signalisation. To allow the reading of the power
consumption of digital electrical meter installed
inside the enclosure, which has to be accessible
from outside.
Purpose
The Tele-Report kit consists on - A polyester
plate with a fixing point for the Tele-Report
plug and the connection device. This plate has
a cut-out which allows the access to the
terminal of the Tele-Report. - Sealing gasket -
Fixing accessories
Description
References
Three references 79741, 79741 79742see table
On demand
Availability
9
10
Info 46
New padlock set for Thalassa wall mounting
enclosures
To satisfy the need for padlocking of this range
Reason
Reference
21438
On stock
Availability
Info 47
Complementary accessory for coupling kits of
Thalassa floor standing enclosures
To fill the loose space on the top and the bottom
of the coupling kit in order to avoid the dust
accumulation and also to provide more aesthetic
for the suited cabinets.
Reason
Reference
79655, 79656, 79657 79658
On stock
Availability
10