Strategy for electron pair reconstruction in CBM - PowerPoint PPT Presentation

1 / 16
About This Presentation
Title:

Strategy for electron pair reconstruction in CBM

Description:

Probes for hot / dense medium. The phase diagram of the strongly ... Vector mesons (?, ?, f) are the only mesons that directly couple to the e.m. current ... – PowerPoint PPT presentation

Number of Views:18
Avg rating:3.0/5.0
Slides: 17
Provided by: gala81
Category:

less

Transcript and Presenter's Notes

Title: Strategy for electron pair reconstruction in CBM


1
Strategy for electron pair reconstructionin CBM
T. Galatyuk, S.Das, C.Höhnefor the
CBM-Collaboration GSI-Darmstadt
  • Motivation
  • The CBM detector
  • Event reconstruction and particle identification
  • Background rejection strategy
  • Summary

DPG Spring Meeting
Gieben March 2007
2
Probes for hot / dense medium
The phase diagram of the stronglyinteracting
matter in the T rB plane
  • Virtual photons can probe the electromagnetic
    structure of nuclear matter under extreme
    conditions
  • The produced dileptons can escape the medium
    essentially undistorted
  • Vector mesons (?, ?, f) are the only mesons that
    directly couple to the e.m. current
  • By means of their 4-momentum, dileptons provide
    information about the parent particle.

? meson is of particular interest ?? ltlt
?fireball (1.3 fm/c ltlt 10 fm/c)
3
Vector meson spectral function
vacuum
nuclear medium
Mass dependence of the electromagnetic form
factor of the pion
R.Rapp (hadronic many-body approach)
Strength of dilepton yield at low invariant
masses is due to coupling to baryons
4
Electron setup of the CBM detector
ECAL
  • STS tracking, momentum determination, vertex
    reconstruction
  • Active Shielding Magnetic Field
  • RICH TRD ( ECAL) electron ID,p suppression ?
    104
  • TOF ( RICH) hadron ID
  • ECAL direct photons p0 and ? e, µ
  • high speed DAQ and trigger
  • 600 charged particles in the acceptance

TOF
TRD
RICH
magnet
STS
There is no detector system which can provide
electron ID before the magnetic field!
5
Background sources of ee-
AuAu collision at beam energy 25AGeV, zero
impact parameter
Radial vs. z position (e?) andBy along the beam
axis
3 ?target? ee-
700 p/- can be identified as an electron
6
Tracking performance
Reconstruction efficiency
Momentum resolution
94 track reconstruction efficiencyMomentum
resolution well below 2
7
Electron identification with RICH, TRD, TOF
Ring radius vs. momentum
55 electron efficiencyp-suppression of 104
well in reach
8
Track topology
Global Track
fake pair
signal
Track Fragment - x, y position no charge
information Track Segment - reconstructed
track Global Track - identified in RICH
9
? conversion rejection
Correlation of the number of STS traversedby
ee- pairs from g conversion
10
?e,reco track vpeprec track correlation
Track Segment
Global Track
ep0 closest track
er closest track
11
Invariant mass spectra
Identified ee-
After all cuts applied
combinatorial bg
combinatorial bg
?
p0
?
?
?
?
No optimization of cuts Free cocktail only
(without medium contribution) Simulated
statistics is equivalent is to 1 spill beam on
target
12
Phase space coverage
pt vs. rapidity distribution of reconstructed ?0
meson after all cuts applied
Signal efficiency 8 No phase space limitation!
13
Invariant mass spectra (generic study)
Accepted in RICH ee-
After all cuts applied
combinatorial bg
combinatorial bg
?
p0
?
?
?
?
More than two orders background suppression in
the intermediate mass region! Signal-to-background
ratio 200 MeV lt mee lt 600 MeV is 1/10
14
Difference between generic and full MC study
  • Distance between neighboring hits in STS 1 was
    applied - excellent double-hit resolution
    (lt100mm) provides substantial close pair
    rejection capability.
  • Rejection of the conversion can be further
    improved by exploiting energy loss information
  • A realistic concept to suppress the field between
    the target and first MVD station has to be worked
    out.

15
Summary
  • We presented simulated dielectron invariant mass
    spectra after full event reconstruction and
    particle identification including realistic
    detector responses
  • Sufficient rejection power by using topological
    cuts in the given CBM geometry
  • Statistic of the simulated data is equivalent to
    1spill of data taken (archive data rate 104
    evt/sec)

16
Thank you
Write a Comment
User Comments (0)
About PowerShow.com