LPG NOZZLE

1
LPG NOZZLE
DESIGNED BY DR. BOB BERNARD TESTED AND SLIGHTLY
MODIFIED BY CENTRAL WHIDBEY ISLAND FIRE RESCUE
2
LPG NOZZLE PARTS
¾ X ½ BUSHING
1 ½ X ½ FITTING COUPLING
2 ½ CAPS
1 ½ PLUG
½ X 1 ½ CONNECTOR
NOT SHOWN 9 X 9 X 3/16 METAL PLATE
3
½ PLUG
DRILL 9/64 HOLES AT 30 DEGREE ANGLE TO VERTICAL
IN THE PLUG AT EACH SIDE OF SQUARE TOP
4
(No Transcript)
5
WELD AT THIS POINT
6
WELD TOP CAP TO METAL PLATE
AFTER WELDING CAP TO PLUG AT THIS POINT, WELD THE
TOP CAP TO THE METAL PLATE
7
CAPS WELDED TO TOP PLATE AND TO PLUG
8
FINISHED LPG NOZZLE
9
NOZZLE INSERTED THROUGH FLOOR OF CAR INTO
PASSENGER COMPARTMENT
10
(No Transcript)