EuroACE presentation - PowerPoint PPT Presentation

1 / 24
About This Presentation
Title:

EuroACE presentation

Description:

builders and contractors need more energy saving products? ... Builders made to buy and use more energy efficient products in all new buildings ... – PowerPoint PPT presentation

Number of Views:33
Avg rating:3.0/5.0
Slides: 25
Provided by: JamesS141
Category:

less

Transcript and Presenter's Notes

Title: EuroACE presentation


1
Marketing Energy Efficiency for Buildings
2
What if
  • it was a legal requirement that buildings had to
    be certified for their energy performance?
  • the certificate had to include recommendations
    for investment in energy efficiency?
  • large buildings had to be upgraded to current
    energy performance standards, whenever they
    undergo renovation?

3
What if
  • boilers and air-conditioning systems had to be
    inspected regularly for performance?
  • minimum energy performance standards in national
    building codes had to be updated every 5 years?

4
Would
  • purchasers and tenants demand higher levels of
    energy efficiency in buildings?
  • builders and contractors need more energy saving
    products?
  • regulators continually improve national building
    codes?

5
The Answer
Probably YES
And the good news is
6
New Rules from the EU
by 4 January 2006
In each EU country (including accession
countries) these rules will have to be in place
Thanks to a new EU law on the energy performance
of buildings
7
Why Was Action Needed?
Climate Change More than 40 of all energy
consumption is from buildings
8
Why Action at EU Level?
A prime mover in energy efficiency
Need for European framework to promote energy
efficiency in buildings
Inadequate levels of energy efficiency across
Europe
9
How is This Happening?
European level
National level
National governments must turn these rules into
national laws
European rules agreed
Effects on building designers, builders, owners,
occupiers
2003
2006
10
The New Rules in Detail
  • By end of 2005, National governments will have
    to
  • Calculate the energy performance of buildings
    using a common framework and a methodology taking
    into account a variety of factors
  • Apply minimum energy performance requirements to
    all new buildings (and revise every five years)
  • Apply minimum standards to existing buildings
    (over 1000m²) undergoing major renovations
  • Define who is qualified to provide certification
    services

11
The New Rules in Detail
  • By end of 2008, Governments will have to
  • Establish energy certification schemes for all
    buildings
  • All newly constructed buildings
  • All public sector buildings
  • All large buildings visited by the public
  • All buildings changing occupation (sale or rent)
  • Introduce inspections of boilers and cooling
    installations
  • Every 2 years but
  • Only every 4 years for gas

exemptions apply for certain categories of
building (e.g. monuments, places of worship.
temporary buildings)
12
The New Rules in Detail
  • From 2008 onwards
  • Calculation methodologies will have to be
    re-examined
  • Every 2 years
  • Certificates will not be allowed to be more than
    10 years old

13
And Their Impact?
Push and Pull
14
The Push Using Market Forces
  • New Rules
  • When buildings are constructed, sold or rented
    out an energy performance certificate is to be
    made available to the buyer or tenant
  • Public Buildings to set an example by being
    certified regularly and visibly
  • All large buildings visited regularly by the
    public to display energy certificate prominently

exemptions apply for certain categories of
building (e.g. monuments, places of worship.
temporary buildings)
15
The Push Using Market Forces
Effect
This new information can be used by the
construction industry as an effective marketing
tool
?
Purchasers and tenants may use this information
in deciding whether to take possession of the
property or not
?
Certification may lead to public naming and
shaming of public buildings that have high
energy inefficiency
?
16
The Pull Legislative ImpactCalculation
methodology to be based on
  • Where relevant
  • Active solar systems and other heating and
    electricity systems based on renewable energy
    sources
  • CHP electricity
  • District or block heating cooling
  • Natural Lighting
  • At least the following
  • Thermal characteristics (incl. Insulation glazing
    and air tightness)
  • Heating installation (incl. hot water)
  • Hot water
  • Air Conditioning
  • Ventilation
  • Built-in lighting
  • Position orientation of building
  • Passive solar systems and solar protection
  • Natural Ventilation
  • Indoor Climatic Conditions

17
The Pull Legislative Requirements
  • New Rules
  • Governments must adapt their minimum standards
    based on this new methodology
  • These standards are to apply to new buildings and
    in the major renovation of large existing
    buildings
  • Minimum Standards to be reviewed every five years
  • Effect
  • Builders made to buy and use more energy
    efficient products in all new buildings and major
    renovation works
  • Building authorities will need to ensure
    sufficient checks are in place to achieve full
    compliance

18
And the Impact on Emissions?
  • The European Commission estimates that these new
    rules will save 45 million tones of CO a year,
    which represents 21 of the EUs Kyoto target for
    2010

2
100
  • Although positive, energy efficiency savings
    could still deliver massive amounts of savings
    with the right political will

Even greater savings through energy efficiency
could be delivered through further legislation
21
Will be achieved
19
What Happens Next?
  • At the National level
  • National governments must now implement the new
    EU rules by passing national laws that achieve
    the objectives set-out
  • EuroACE member companies should therefore
  • Ensure national legislation is passed and that it
    is on time or before the deadline and includes
    all the measures
  • Engage government to ensure that the new
    calculation methodologies are as thorough as
    possible
  • Encourage government to voluntarily lower the
    threshold standards to include the renovation of
    ALL buildings, not simply those larger than
    1000m2
  • Spread the news- ensuring that the new
    requirements are known and understood by all of
    those affected

20
What Happens Next?
  • At EU level
  • The EU will consider strengthening the
    requirements and promoting the new rules
  • EuroACE will therefore
  • Continue to campaign for stronger legislation,
    greater support and monitoring
  • Engage EU authorities to do more to promote
    energy efficiency generally

21
In Conclusion
Although the foundations have been laidmuch work
is still to be done
22
However, If We Work Together
EuroACE Members
National Authorities
European Authorities
Construction Industry
23
We Can Accomplish the Task
Move towards combating climate change
Compare the energy performance of different
buildings
Fulfil the commitments set out in the the
legislation
Sell more energy efficient products
24
Who We Are
Since 1998, Europe's leading companies involved
with the manufacture, distribution and
installation of a variety of energy saving goods
and services have worked together as The European
Alliance of Companies for Energy Efficiency in
Buildings (EuroACE)
  • Aereco
  • Armacell International
  • BING
  • BPB
  • CRH Europe
  • Danfoss
  • Giacomini
  • Grundfos
  • Hunter Douglas
  • Huntsman (Europe)
  • Knauf Insulation
  • Paroc
  • Philips
  • Pilkington
  • Rockwool International
  • Saint-Gobain Isover
  • Siemens
  • Skanska
  • URSA Deutschland
  • Velux

To find out more visit www.euroace.org
Write a Comment
User Comments (0)
About PowerShow.com