Quick

1
Quick Start Up Tool
2
Why the StartUp Tool?

• Plug-and-play installation of Ingate and SIP
  trunking, as simple as possible. Necessary steps
• Unpack your new Ingate box and connect it to the
  LAN.
• Run the StartUp tool
• Apply configuration on the Ingate
• DONE
• Will help to install the SIP Trunking module if
  not preinstalled.

3
Step 1 Address provisioning
A. Connect you Ingate according to the picture
B. Type mac address and IP address of the Ingate
unit.
D. Press Next and the tool will automatically
provide an IP address to the Ingate.
C. Select a password. No password are set default.
E. When done the SIP Trunking tool can be
launched.
Status information
4
Step 2 Trunking configuration
C. Select SIParator type (only available for
SIParators).
A. Select ITSP from drop down menu and provide
necessary account information
D. DNS servers to use. Optional
E. Optional to add and remove pre-fixes.
B. Select IP PBX type and IP address on your
internal network.
F. Configure external interface using DHCP or
static IP
G. Configure netmask for the internal network
H. When done the tool will generate a
configuration based on you input an you will
automatically be redirected to the Ingate and
only need to apply the configuration and your
done!
5
More options
Trunking Provider selection. Use Generic if you
cant find your provider
IP PBX selection. Use Generic if you cant find
your IP PBX
Available options for number manipulation.