Title: Compressed Gas Safety for Laboratories
1Compressed Gas Safety for Laboratories
- Discussion topics
- Potential hazards
- Safety considerations regarding
- Selecting/ Receiving gases
- Handling cylinders
- Use Storage
- Research Experiments Systems
- Emergency procedures
Stanford University Environmental Health
Safety Occupational Health Safety Program,
725-3209, lsteng_at_stanford.edu Stanford Fire
Marshals Office 723-0609, jleung_at_stanford.edu Co
nmpressedgas.Rev.9-2000.ppt IH Report 98-080 /
SUFMO 02-00
2Additional Training Will Be Required
This training provides information about safe
handling, storage and general hazards of
compressed gases. It does not provide specific
detailed training necessary to safely install or
use compressed gases. Prior to actual use of any
compressed gases your supervisor will need to
provide operation specific training in this area.
- If you dont understand ask questions!
- If you forget ask questions!
- If it doesnt seem right ask questions!
- We would rather answer questions than deal with a
accident
3Regulations for Compressed Gas Use Storage
- Compressed gas use storage are regulated by
different organizations. - California Fire Code
- Occupational Safety Health Administration
(CalOSHA) - Santa Clara County Environmental Health
Department
4Characteristics of Gases
- Gases are much lighter than liquids solids.
- The molecules of a gas are always in motion.
- Escaped gases will eventually distribute
themselves throughout the air in a room or other
confined space. - Some gases have odors, some do not.
- Most gases are invisible, some can be seen.
- All gases have some property that can be
hazardous to you.
5Types of Gases
- Non-liquefied Compressed Gases Nitrogen, Argon,
Helium, Oxygen, Hydrogen - Liquefied Compressed Gases-Chlorine, Hydrogen
chloride, Carbon Dioxide, Nitrous Oxide,
Dichlorosilane, Hydrogen Bromide - Compressed Gases in a Solution-Acetylene
- Cryogenic Liquefied Gases-Nitrogen, Argon,
Helium, Oxygen, Hydrogen
6Potential Hazards
- High Pressure
- Asphyxiation
- Flammability
- Explosion
- Toxicity
- Corrosion
- Oxidation
- Pyrophoric
- Cryogenic
7Purchasing/ Receiving Gases
- REDUCE YOUR RISKS!
- Select the lowest concentration of hazardous gas
that will allow you to perform your experiment. - Purchase the smallest quantities to satisfy your
research needs. - Select only gases that are delivered in
returnable containers - When receiving gas cylinders
- Check for leaks
- Visually inspect for damage
- Ensure valve cover and shipping cap are properly
in place. - Check that cylinder is properly labeled
8Cylinder Story
Cylinders come in different sizes, shapes and
colors
Remember the gas supplier must label the cylinder
with the contents Check the label before you
accept, move or use the cylinder.
9Safe Handling of Gas Cylinders
- Before handling, make sure that valve cap is
secured - Transport gas cylinders using only a suitable
cart - Always take the safest most direct route when
- transporting gas cylinders
- Never leave un-restrained cylinders un-attended
10Safe Storage of Compressed Gas Cylinders
- Only store cylinders in authorized locations.
- Separation of incompatibles (check SU storage
group information) - Restricted access to compressed gas cylinder
storage. - Store away from main building access/ egress
points
11Safe Storage of Compressed Gases
- Attach valve cap when a gas cylinder is not in
service - Cylinders must be stored upright
- Metal restraints at 1/3 AND 2/3 height of
cylinder - Max of 2 gas cylinders per set of chains
- Cylinder bench clamps
- are NOT allowed
12Safe Use of Compressed Gases
- DO NOT tamper with the stem and cylinder valves
- NEVER use damaged regulators, connectors, piping,
etc. - For cylinders in use, cylinder valves must have
hand wheel attached - Close cylinder valve whenever
- work is finished
- cylinder is empty
- Label empty cylinders
- Ensure safe proper exhaust for purging
pressure relief for toxic, flammable, or
corrosive gases
13Additional Precautions
Some gases require special permits and controls
for use. These are toxic, corrosive, flammable
and pyrophoric gases. Check with SU EHS during
the design of the experiment in order
to understand the permitting and engineering
control requirements.
14Research Experiments and Systems
- Label all gas lines
- Remember to check safety devices (check valves,
flow restrictors, pressure gauges, regulators) - Select proper construction materials
- Leak test system before start-up at cylinder
changes - Check for proper exhaust ventilation for the lab
and apparatus prior to opening gas cylinders
15Emergency Procedures
- Standard Operating Procedures (SOP)
- Bottom line.Not only are they a good idea, they
are required! - BE PREPARED!
- Know your emergency procedures
- Know your emergency contacts
- Know what to do if the unexpected happens
16For More Information
- EHS Compressed Gas training
- Guide to Safe Handling of Compressed Gases,
Matheson - Handbook of Compressed Gases, Compressed Gas
Association - Gas Data Book, Matheson
- Occupational Health Safety Program- EHS
- Ling Sue Teng, 725-3209, lsteng_at_stanford.eud
- Stanford Fire Marshals Office- EHS
- Joseph Leung, 723-0609, jleung_at_Stanford.EDU