Stainless Steel 316L Perforated Plates Suppliers

1
https//www.jaimanmetalloys.com/stainless-steel-31
6l-perforated-supplier-stockist-exporter/ Stainles
s Steel 316L Perforated Plates Suppliers Stainless
Steel 316L Perforated Sheets are available with
us in many different forms like coiled, rolled,
hot rolled, foils, ring, strip, and flat blanks,
etc. The reason for their enhancement in quality
is the addition of chromium and other metals
which makes them workable in environments of
extremities as well. They are widely used in
industries of very high importance like oil and
gas, and so on. The sheets that we produce are
indicated with universal gauges of ASTM A240 and
ASME SA 240 so they can be utilized around the
world. Aside from these, they are even
standardized with different forms. Size is an
essential viewpoint and that is the reason we
have a size range for these fittings running from
1000mm to 6000mm in width, 2000 to 6000mm in
length with a thickness of 4mm to 100mm. If you
need these sheets in any other size range then
you can get in touch with us and put in a request
of your size need. We will convey them to you in
the speediest conceivable way.
An item is comparable to its quality and to
guarantee the best quality all our item
experience through different tests that are done
on them. We perform tests like mechanical tests,
hardness tests, concoction investigation,
smoothing test, miniaturized scale and
large-scale tests and any more. All these tests
give the best consumer loyalty and quality. These
Stainless Steel 316L Peforated Sheets are then
pressed with selective care and harm security
convention so no mischief should be possible on
these fittings. Once tried and pressed we convey
these fitting at the quickest rate and at the
least expensive cost.
Stainless Steel 316L Perforated Sheet
Specification
Standard ASTM / ASME A240 / SA240 Size 1000
mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000
mm, 2000 mm x 2000 mm, 2000 mm x 4000
mm Thickness 0.1mm to 12 mm Thk Form
Decorative Round Hole, Dimpled, Square Holes,
Gold Mirror Round Hole, Round Punch, Etched,
Colored Perforated Sheets Finish Hot rolled
plate (HR), Cold rolled sheet (CR), 2B, 2D, BA
NO(8), SATIN (Met with Plastic
2
Coated) Hardness Soft, Hard, Half Hard, Quarter
Hard, Spring Hard etc.
Equivalent Grades of SS 316L Perforated Sheet
STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR
SS 316 1.4401 / 1.4436 S31600 SUS 316 316S31 / 316S33 Z7CND17-11-02 X5CrNiMo17-
Stainless Steel 316L Perforated Sheet Chemical
Composition
Element SS 316
C 0.08 max
Mn 2.0 max
Si 1.0 max
P 0.045 max
S 0.030 max
Cr 16 18
Ni 11 14
Mo 2 3
Fe 67.845 min
Mechanical Properties of SS 316L Perforated Sheet
Element SS 316
Density 8.0 g/cm3
Melting Point 1400 C (2550 F)
Tensile Strength Psi 75000 , MPa 515
Yield Strength (0.2Offset) Psi 30000 , MPa 205
Elongation 35
For More Details Visit Our Website-
https//www.jaimanmetalloys.com/stainless-steel-31
6l- perforated-supplier-stockist-exporter/ Call
Us- 8433924298