Plastic Crusher Machine Crushing Hard Plastic Waste

1
Heavy Plastic Crusher Machine Crushing Hard
Plastic Waste

• www.machinemg.com

2
Plastic Crusher Machine Crushing 

• The plastic crusher machine is suitable for
  crushing the hard plastic waste with small wall
  thickness and hollow structures. The crusher
  machine has a strong cutting chamber, welded with
  thick steel board and fine welded process. the
  rotor passes the strict dynamic balancing
  testing. Rotary blades and stationary blades are
  made of alloy steel such as D2. Size of crushed
  materials can be controlled by using the screen
  sieves with different hole diameter.

3
Application of hard plastic crusher machine
plastic barrels, drums, tank, containers, bins,
baskets, chairs, pallets, shells, etc.
4
Reference videos of the hard plastic crusher on
our YouTube Channel. Consist of the hard plastic
crusher machine 1, rotor and blades The rotor of
crusher is with 5 mounting rows for the rotary
blades in V shape arrangement, So that the
plastic material can be cut into pieces instead
of being torn apart. In this way, It brings the
higher throughput but less powder material,
smooth cutting, and lower noise levels. The
plastic crushers use external bearing mounting
way, water proof, easy maintenance. Both rotary
blades and stationary blades are made of alloy
steel, such as D2, good durability. And the
blades can be sharpened repeatedly in a long time
once they are blunt. 2, driving system The drive
motor is mounted on tension rails to allow easy
adjustment of the V-belt tension. The motor
drives the rotor through V belt and pulley. Good
quality motors are used for our crusher machines,
for example, WN, SIEMENS and JIAMUSI, with high
efficiency of energy utilization for long stable
running time. 3, hopper  Usually we make the
hard plastic crusher machines with side feeding
inlets, and install plastic curtains on the inlet
of crusher, to prevent the materials pump out
while the crushing. On the top inside of the
hopper, water spray unit is installed, but the
users can choose to crush the plastic with water
or without water.Two units are optional for
opening of the hopper for blade replacement or
chamber cleaning. One is mechanical screw rod
design, the other one is hydraulic system. 4,
screen unit Screen sieves with different mesh
sizes are replaceable based on different size
requirements. A mechanical unit for easy change
working.The hinged screen frame is convenient for
replacement of the screen sieves, and it can be
installed and removed through a separate door.
5

• 5, crusher body frame
• The body frame has a solid welded construction
  with thick carbon steel to form the heavy
  structure for steady crushing, avoid the frame
  cracking and excessive stress damage while
  crushing with full material loading. And
  anti-vibration rubber feet can be fixed to reduce
  vibration and noise.
• 6, safety limit switch
• A safety unit is installed on the crusher frame,
  once the hopper or front door is not closed well,
  the crusher will not start up.
• And two emergency stop buttons are set on the
  machine body and control panel for quick response
  when emergency happen.
• Assist machines for working with the hard plastic
  crusher
• 1, belt conveyor it can be used to feed the
  waste plastic materials into the crusher for
  crushing from the ground, labor saving, and
  stable feeding control.
• 2, screw loader it is usually used to discharge
  the crushed materials from the crusher bottom.

6
Contact Us

• Website MachineMG.com
• Email gramplas16_at_gmail.com
• Phone [phone]
• Address 1010, GuoTai Dongfang Mansion, No.9,
  Renmin East Road, Zhangjiagang, Jiangsu Prov.,
  P.R.China 211408