Metal Beam Crash Barrier (W beam & Thrie Beam)

1
Metal Beam Crash Barrier (W beam Thrie Beam)
2
(No Transcript)
3
Background

• Crash Barriers are provided to ensure high
  resistance in crash impact because of its
  flexible beam action. In this way it minimizes
  the speed of vehicle and also increases the
  driver confidence while riding through any
  critical area. It also increases visibility at
  night or in foggy conditions.
• Crash Barriers are provided to ensure high
  resistance in crash impact because of its
  flexible beam action. In this way it minimizes
  the speed of vehicle and also increases the
  driver confidence while riding through any
  critical area. It also increases visibility at
  night or in foggy conditions.

4
What Aarneel Have

• Our range of metal beam crash barriers consists
  of two variants W-Beam Thrie Beam as per MORTH
  Clause 811.3 IRC SP 84, IRC SP87, IRC SP
  99 IRC 119 IRC5
• It is qualified to crash testing Road Restraint
  System as per European EN 1317-2 Standard
  results are satisfactory as per the requirements
  of MORTH Guideline RW/NH-29023/02/2019-SR
  (PB), Dated 01st January,2020

5
W-Beam

• W-Beam Structural Elements
• Process Methods
• Cold Roll Forming, Piericing, Shearing, Profile
  Bending, Hot Dip Galvanizing
• Sizes/Ranges
• W-Beam                   - L 4318 x W 312 x H 81
  x T 2.50 to 3.0 mm
• End Section              - L 736 x W 312 x H 81 x
  T 2.50 to 3.0 mm
• Post                          - L 1100 to 1800 x
  W 150 x H 75 x T 4.50 to 5.0 mm
• Spacer                      - L 330 to 360 x W
  150 x H 75 x T 4.50 to 5.0 mm
• Bolts Nuts (Hex/Button head) - M16 x P 2.5 x L
  40m
• Raw Materials Specifications
• W-Beam/End Section    - HR Sheet T 2.50 to 3.0 mm
  as per IS1079 HR3 / IS2062  E-250 A
• Post Spacer              - HR Sheet T 4.50 to
  5.0 mm as per IS2062 E-250 A
• Bolts Nuts (Hex/Button head) - M16 as per
  IS1367 / 136
• Surface Finishing
• Hot Dip Galvanized (550 g/m²) - As per IS2629

6
Thrie-Beam

• Thrie-Beam Structural Elements
• Process Methods
• Cold Roll Forming, Piericing, Shearing, Profile
  Bending, Hot Dip Galvanizing
• Sizes/Ranges
• Thrie-Beam                    - L 4318 x W 502 x
  H 81 x T 2.50 to 3.0 mm
• End Section                   - L 760 x W 502 x H
  81 x T 2.50 to 3.0 mm
• Post                               - L 2000 to
  2100 x W 150 x H 75 x T 4.50 to 5.0 mm
• Spacer                           - L 550 x W 150
  x H 75 x T 4.50 to 5.0 mm
• Bolts Nuts (Hex/Button head) - M16 x P 2.5 x L
  40mm
• Raw Materials Specifications
• Thrie Beam/End Section  - HR Sheet T 2.50 to 3.0
  mm as per IS1079 HR3 / IS2062  E-250 A
• Post Spacer             - HR Sheet T 4.50 to
  5.0 mm as per IS2062 E-250 A
• Bolts Nuts (Hex/Button head)          - M16 as
  per IS1367 / 1364
• Surface Finishing
• Hot Dip Galvanized (550 g/m²) - As per IS2629