Mini WallPAck DS - KrutLED Wholeslaler (1)

1
Article No Version Prepared By Checked By

06.23
K-OD SERIS LED MINI WALL PACK
V A R I A N T S
Wattage
Product Code
Operating Temperature
20W
KLSN-MWP09-20WBMSA1-BRP50
-40C To 45C
Upgrade your lighting with Krut LED's Mini Wall
Pack LED lights. These compact and versatile
fixtures deliver powerful illumination, making
them perfect for various applications. Whether
it's illuminating building perimeters, walkways,
or entrances, our Mini Wall Pack LED lights o?er
exceptional energy efficiency and durability.
With their sleek design and easy installation,
they seamlessly blend into any architectural
setting while providing bright and reliable
lighting. Trust Krut LED for efficient and long-
lasting Mini Wall Pack LED lights that elevate
your outdoor spaces. Illuminate with confidence!
A P P L I C A T I O N S
Building perimeters Loading docks Parking areas
Walkways Entrances Stairways Pathways
F E A T U R E S
Durable construction for long-lasting
performance. Sleek design seamlessly integrates
into any setting. Reliable lighting for enhanced
safety and visibility. Powerful illumination for
various applications. Energy-efficient and
cost-e?ective operation. Compact and versatile
lighting solution. Easy installation for
hassle-free setup.
gt80
RATED LIFE
WARRANTY
CRI
All rights reserved. Krut LED reserves the right
to make changes to speci?cations and/or
discontinue any product at anytime without the
notice. Information presented in this document is
reliable and accurate, It does not represent any
quotation or contact. No liability will be
accepted by the contributor by the publisher for
any consequences for its use. Reproduction in
whole or part is prohibited without prior consent
of the copyright owner.
1 864 401 8156 sales_at_krutled.com
2
Article No Version Prepared By Checked By

06.23
T E C H S P E C S
Wattage 20W
Input Voltage Range 120-277 VAC
Input Frequency 50/60Hz
Power Factor gt 0.9
THDA 20
Dimming 0-10V
Minimum Dimming 0
Driver Type (CC/CV) CC
Surge Projection (CM) 2.5kV
Surge Projection (DM) 2.5kV
Driver Output Voltage 77.4V
Driver Output Current 245mA
O P T I C A L P A R A M E T E R S
Wattage 20W
Total Lumens (Min) 2817LM
Lumens Efficiency (Min) 132LM/W
Product CCT 5000K
CCT Range 5028K 283
Product CRI gt 80 Ra
Product Beam Angle 100 Degree
M E C H A N I C A L P A R A M E T E R S
Wattage 20W
Product Dim. (mm) 128 X 70 X 209
Ingress Protection IP65
IK Protection IK08
Housing Type Die-cast aluminum
Housing Weight NA
Product Net Weight 0.7KG
All rights reserved. Krut LED reserves the right
to make changes to speci?cations and/or
discontinue any product at anytime without the
notice. Information presented in this document is
reliable and accurate, It does not represent any
quotation or contact. No liability will be
accepted by the contributor by the publisher for
any consequences for its use. Reproduction in
whole or part is prohibited without prior consent
of the copyright owner.
1 864 401 8156 sales_at_krutled.com
3
Article No Version Prepared By Checked By

06.23
D I M E N S I O N S
Photocell
S H I P P I N G S H I P P I N G
Wattage 20W
Product Dim. (in) 5.04 X 2.76 X 8.23
Case Lot 10
Master Carton Dim. (in) 16.42 X 11.22 X 9.41
Master Carton Weight(lbs) 16.53
All rights reserved. Krut LED reserves the right
to make changes to speci?cations and/or
discontinue any product at anytime without the
notice. Information presented in this document is
reliable and accurate, It does not represent any
quotation or contact. No liability will be
accepted by the contributor by the publisher for
any consequences for its use. Reproduction in
whole or part is prohibited without prior consent
of the copyright owner.
1 864 401 8156 sales_at_krutled.com
4
Article No Version Prepared By Checked By

06.23
I N S T A L L A T I O N G U I D E
Installation I 1. Turn o? the power
2. Remove the rubber plug and loosen 4 screws
ON
OFF
3. Remove the 1/2 end cap
4. Peel o? the yellow sticker and paste it on
the round area of the bottom plate
5. Fix the bottom plate on the round plate
6. Make wiring connection and make sure the good
protection
7. Fix the fixture by 4 screws, block up the two
holes with rubber plugs
8. Make sure good wiring and screws fastening,
then turn on the power
ON
OFF
All rights reserved. Krut LED reserves the right
to make changes to speci?cations and/or
discontinue any product at anytime without the
notice. Information presented in this document is
reliable and accurate, It does not represent any
quotation or contact. No liability will be
accepted by the contributor by the publisher for
any consequences for its use. Reproduction in
whole or part is prohibited without prior consent
of the copyright owner.
1 864 401 8156 sales_at_krutled.com