Quality Industrial Lubrication for Equipment

1
How to Identify and Troubleshoot Hydraulic Hose
Failure
2
Abrasion

• Abrasion is the most common cause of hydraulic
  failure. Various things, including debris,
  cross-threading, incorrect hose installation, and
  exterior or interior leaks, can cause abrasion.
  For Hydraulic hose fabrication and repair, avoid
  Abrasions.

3
Poor Routing

• Hydraulic hoses should be routed appropriately to
  avoid unnecessary rubbing, abrasion, and snags.
  Be sure lines are not rubbing on sharp edges or
  contact points, such as where the hydraulic hose
  connects to a fitting or power take-off.

4
Tube Erosion

• Internal tube erosion is typically caused by poor
  hydraulic fluid quality and contamination, lack
  of filtration, or improper hydraulic hose repair.
  One of the best ways to prevent Hydraulic hose
  fabrication and repair prevent tube erosion is to
  determine the correct size of hose for the
  application and use of proper hydraulic fluids.

5
CONTACT US

• HITECH INDUSTRIAL
• sales_at_hitech-industrial.com
• 219 707 5956
• https//www.hitech-industrial.com/
• 2502 Beech Street (Suite 100) Valparaiso, Indiana
  46383

6
THANK YOU