Engine Timing Belts: 5 Things You Should Know - PowerPoint PPT Presentation

About This Presentation
Title:

Engine Timing Belts: 5 Things You Should Know

Description:

A timing belt is a component found in many internal combustion engines that synchronizes the rotation of the crankshaft and camshaft(s) so that the engine's valves open and close at the proper times during the cycle of the four-stroke combustion process. For more information: – PowerPoint PPT presentation

Number of Views:3
Slides: 9
Provided by: Shibhamtraders
Category: Other
Tags:

less

Transcript and Presenter's Notes

Title: Engine Timing Belts: 5 Things You Should Know


1
Engine Timing Belts
5 Things
You Should Know
  • https//www.shibambelting.com/

2
INTRODUCTION
  • Many people are aware that a damaged timing belt
    is bad news for a car's engine, but you may not
    be aware of much more. This simple component
    serves a crucial role and can spoil your day if
    it fails. We believe that learning more about
    timing belts will give you a greater appreciation
    for everything they do. Here are five things you
    should know about the car timing belt.

https//www.shibambelting.com/special-timing-belts
-banded-belts/
3
1. The Function of a Timing Belt
  • To get a better understanding of what a timing
    belt performs, consider the combustion process of
    a gas engine. The intake valves in an engine's
    cylinders open to allow a combination of fuel and
    air into the combustion chamber. The valve closes
    and the piston moves up the cylinder to condense
    the fuel-air mixture. The mixture is ignited by a
    spark plug, and the combustion forces the piston
    back down. As the piston returns to the top of
    its stroke, an exhaust valve opens, letting waste
    gases be pushed out of the cylinder.
  • The pistons are connected to a crankshaft, which
    converts piston motion into rotational output.
    Camshafts are responsible for opening and closing
    the intake and exhaust valves. The timing belt
    ensures that the motion of the camshaft or
    camshafts is in sync with that of the crankshaft.

4
2. Why Is a Damaged Timing Belt So Unsafe?
  • Free-running or non-interference engines were
    used in older vehicles. The pistons and valves in
    these engines never share the same space in the
    cylinder. Most modern engines, however, are
    interference engines. These engines permit the
    pistons to condense, even more, resulting in more
    powerful and efficient engines. The trade-off is
    that if the valves were open and the pistons were
    fully extended, the valves and pistons would
    occupy the same space in the cylinders.
  • Because the crankshaft and camshafts are
    synchronized, this should not happenbut a
    damaged timing belt means that these two parts
    will no longer be synchronized. In a free-running
    engine, this would result in reduced engine power
    and, eventually, engine shutdown. However, things
    are not the same in interference engines. The
    pistons are likely to move up and strike the open
    valves, causing significant damage to a variety
    of internal engine components.

5
3. Signs of a Failing Timing Belt
  • Unfortunately, there are usually no warning signs
    that a timing belt is about to fail. There may be
    some minor indications, such as a ticking noise
    coming from the engine. However, these symptoms
    are easy to overlook and difficult to correctly
    diagnose. A timing belt will frequently crack
    without warning. As a result, it's critical to
    replace your timing belt when your owner's manual
    recommends it. Otherwise, you're taking a huge
    risk.

6
4. The Cost of Timing Belt Replacement
  • The timing belt is a simple rubber belt, and the
    component itself isn't particularly expensive.
    However, if you call any place and ask for an
    estimate on replacing a timing belt, you will be
    quoted hundreds of dollars. Why is this the case?
    Changing a vehicle's timing belt is a
    time-consuming and labor-intensive process. To
    replace the timing belt, technicians must
    disassemble a large portion of the engine, which
    takes a lot of time. Before removing the old
    belt, they will inspect the seals, pulleys,
    tensioners, and other components. Following that,
    they'll need to set the proper timing and test it
    to ensure the belt is working properly. Finally,
    the engine will be reassembled. This requires a
    lot of time and exceptional skill. As a result,
    timing belt replacements are among the more
    expensive services your car will require.
    However, it is still less expensive than
    rebuilding an engine.

7
5. Timing Belts Are Not Common on All Vehicles
  • If your owner's manual doesn't really specify
    when you should change your timing belt, your car
    may not have one at all. Instead, it could be
    outfitted with a timing chain. A timing chain, as
    the name implies, has the same function as a
    timing belt, but is made of metal rather than
    rubber. Timing chains, unlike timing belts, are
    unlikely to need replacement. They are, however,
    heavier and noisier than belts.

8
Thanks!
  • Do you have any questions?
  • 971 25548118 shibamtraders_at_gmail.com
    https//www.shibambelting.com/
Write a Comment
User Comments (0)
About PowerShow.com