Shielding a Magnetic Field with Neodymium Magnets

1
Shielding a Magnetic Field with Neodymium Magnets
https//www.climemagnet.com/arc_magnets/index.html
2
Motor arc Magnets is a region that has a magnetic
force that can act on another magnet, traveling
charged particle, or electric current. A magnet
is a magnet around a magnet. When iron filings
are dropped around the magnet, this field is very
obvious, and a certain pattern will form along
the lines of this field. When a magnetic field
is used in a real-world situation, there are
times when an object needs to be shielded from
the field using a technique known as shielding.
3
The lines of the magnet are altered by the use of
a shielding material. In point of fact, the
material "conducts" the field lines in the
direction of least resistance that it creates.
Therefore, shielding should not be taken
literally because the magnet's lines are not
stopped or blocked rather, only their path is
altered. The shielding material is a better
conductor than air and provides a low-energy
route for field lines to travel. The process of
shielding is not difficult nonetheless, one
needs to consider a few elements to obtain the
best outcomes.
4
First and foremost, the shield should not have
sharp corners because the magnet's lines will
resist sharp turns. As a result, shields with
spherical and cylindrical forms are most
effective. The shield's size should be the next
consideration. A substantial shield will
undoubtedly be exposed to additional magnet
lines However, the shield will not force these
lines to pass through it. In most cases, a shield
that is six feet square and is used in a
practical home setting is sufficient to protect
the space beyond two to three feet from the
magnetic source.
5
By layering the material and increasing its
thickness, the shield becomes more effective.
Lastly, the shield surface's proper alignment
will also have an impact. The orientation of the
magnetic field of Neodymium Magnets when it comes
into contact with the shield's surface is
affected by where the shield is placed. The best
position is to align the shield surface so that
it is parallel, or as parallel as possible, so
that the field can see the most of the edge area.
6
Address NO.1975 JIANNAN ROAD, NINGBO State
Country CHINA Zip 315040 Contact email id
info_at_climemagnet.com Phone No.
86-574-27903196 Fax [phone] https//
www.climemagnet.com/neodymium-magnets.htm