All Concept About Landing and hydrant valve.

1
All Concept About Landing and hydrant valve.
2

• In this article, we will be discussing about two
  types of valves used in fire fighting. Landing
  valve is used to control the water flow from the
  fire hydrant to the hose. Hydrant valve is used
  to control the water flow from the fire hydrant
  itself.
• Landing valve 
• A landing valve is a type of valve that is used
  in firefighting. It is installed on the side of a
  building and is used to connect a fire hose to
  the water supply. 
• The landing valve is opened by turning the
  handle clockwise. This opens the valve and allows
  water to flow through the hose. The landing valve
  can be closed by turning the handle
  counterclockwise. This stops the flow of water
  through the hose. 
• The landing valve is an important part of the
  firefighting system. It allows firefighters to
  quickly connect their hoses to the water supply
  and start fighting the fire.
•  
• Hydrant valve 
• A hydrant valve is a type of valve that is used
  to control the flow of water from a hydrant.
  Hydrant valves are typically located at the base
  of the hydrant, where the water supply line
  enters the hydrant. The hydrant valve is opened
  to allow water to flow into the hydrant, and
  closed to prevent water from flowing out of the
  hydrant. 

3

• Hydrant valves are an important part of fire
  fighting because they allow firefighters to
  control the flow of water from the hydrant.
  Without a hydrant valve, firefighters would not
  be able to control the flow of water from the
  hydrant and would not be able to put out fires
  effectively. 
• Hydrant valves are made from a variety of
  materials, including brass, bronze, cast iron,
  and steel. Brass is the most common material for
  hydrant valves because it is strong and durable.
  Bronze and cast iron are also used for hydrant
  valves because they are also strong and durable.
  However, steel is sometimes used for hydrant
  valves because it is less likely to corrode than
  other materials.

• Hydrant valves come in a variety of sizes,
  depending on the size of the hydrant. The most
  common size for a hydrant valve is 2 1
•  
• Fire fighting
• 1. Fire fighting is the process of extinguishing
  or containing fires. 
• 2. Landing valves are used to control the flow of
  water from
• a fire hydrant. 
• 3. Hydrant valves are used to control the flow of
  water from a fire hydrant. 
• 4. Fire hoses are used to direct the flow of
  water from a fire hydrant to the fire. 
• 5. Fire extinguishers are used to extinguish
  small fires. 

Fire Extinguishers
4

• Conclusion 
• Kartar Valves is one of the best Fire Fighting
  Equipment Manufacturers in India. Now in this
  article has looked at two different types of
  valves used in fire fighting the landing valve
  and the hydrant valve. Both of these valves are
  essential in ensuring that water can flow quickly
  and easily to where it is needed, making them an
  important part of any fire fighting setup. If you
  are planning on setting up a fire fighting
  system, be sure to include both of these valves
  in your design.

Fire Extinguishers
5
Thank You