Choosing a Fiber Optic Tool Kit at Sunmafiber

1
WELCOME TO SUNMAFIBER.COM
2
Fiber Transceiver
SFP Transceiver Module The SFP transceiver
supports dual data-rate of 1.25Gbps/10.625Gbps
and up to 180km transmission distance with
single-mode fiber or 550m with multi-mode fiber.
The transceiver consists of two sections The
transmitter section incorporates a FP or DFB
laser.
The SFP transceiver supports dual data-rate of
1.25Gbps/1.0625Gbps and up to 120km transmission
distance with single-mode fiber or 550m with
multi-mode fiber.The transceiver consists of
two sections The transmitter section
incorporates a FP or DFB laser. the receiver
section consists of a PIN photodiode integrated
with a trans-impedance preamplifier (TIA).All
modules satisfy class I laser safety
requirements. The optical output can be disabled
by a TTL logic high-level input of Tx Disable. 
Tx Fault indicates that degradation of the laser.
Loss of signal (LOS) output indicates the loss of
an input optical signal of receiver.
3
EDFA Optic Amplifier
High Power Optical Amplifier The SFP transceiver
supports dual data-rate of 1.25Gbps/10.625Gbps
and up to 180km transmission distance with
single-mode fiber or 550m with multi-mode fiber.
The transceiver consists of two sections The
transmitter section incorporates a FP or DFB
laser.
4
Fiber Patchcord Line
AFCM-2000 Automatic Fiber Cable Cutting
Machine Automatic Opical Fiber Cable Cutting
Machine is applied for producing fiber patchcord,
and it is a professional equipment with measuring
length / cutting and winding fuctions. It could
cut different indoor optical fibers into required
length and wind cable into circularity.
5
Optical Power Meter
ST-3216 New Optic Power Meter ST-3216 Handheld
Optical Power Meter is a newly designed fiber
optic tester, which aims at the installation,
engineering acceptance and maintenance of fiber
network. Compared with other usual power meters,
the ST-3216 has more functions.
ST-3216 Handheld Optical Power Meter is a newly
designed fiber optic tester, which aims at the
installation, engineering acceptance and
maintenance of fiber network. Compared with
other usual power meters, the ST-3216 has more
functions, like automatic wavelength
identification, auto wavelength switching,
intelligent backlight, data savage via USB
port. Combined with ST-3116 handheld optical
light source, it offers a quick and accurate
testing solution on both SM and MM fibers.
6
Wuhan Sunma Technology Co,.LTD. Address 88,
Mingyuan Road, Optic Valley, Hongshan, Wuhan
430074, Hubei, China Tel [phone],
86-27 5177 9650 Fax [phone] E-mail
info_at_sunmafiber.com Website http//www.sunmafibe
r.com/