How to recharge the Car AC?

1
How to Recharge the Car AC?
2

• This article will give you information on the car
  AC service. Also, you will learn about the way to
  charge the car's AC. If you want to get the
  information this way, you have to read the
  following facts of the article.
• How the AC of the car works?
• A car AC works by converting AC from its liquid
  form to the gaseous form. The car's AC system
  uses temperature and pressure management to
  transform the state of AC from liquid to gaseous
  form.
• The car's AC absorbs the vehicle's heat and
  humidity when the conditions change from one to
  another and permits the car refrigerator system
  to produce dry and cold air.

3
Signs that tell you that your refrigerator system
needs the recharge

• There are a few signs that the car AC system
  needs to be recharged if it shows and develops
  any leaks.
• Warm air being blown by AC
• Whether your AC System of the car needs to the
  recharged is an easy and quick way to know if it
  blows the air out from inside vents or not, less
  refrigerant in the vehicle impacts the
  performance of the system because the AC system
  works by circulating the compressed refrigerant.

4

• AC clutch will not engage
• When the car's AC system is fully functional, you
  hear the little click as the clutch of the air
  refrigerant engages.
• If you do not hear the little click, it means the
  AC system of a car is not working correctly, and
  the refrigerant level is going too low.
• For this, you should contact the car AC recharge
  service providers.

5

• How to Recharge the Car AC?
• Get your gloves and goggles, grab the
  refrigerant, and fix the hose under the
  operation. Here you get the following
  instructions to recharge the AC of your car
  successfully.
• Start your car, place it in the park, and here
  apply the parking brake.
• Then set the AC of your car at the coldest
  setting and fan to the high level and the air
  circulator to the fantastic setting

6

• Remove the cap from the low-pressure AC service
  port between the evaporator and compressor after
  opening the hood. If you face difficulties
  finding a low-pressure service port, the AC Pro
  is considered a helpful online port locator.
• When the fitting process is done from the
  refrigerant hose that only fits the low-pressure
  fitting, then they are known as the second
  approach.
• Now make the connection with the hose and the
  low-pressure point if the attachment hose is
  unplugged from the car AC
• Now you should look at the supplied gauge and set
  the dial temperature to the current temperature
  on which the compressor is turned on.
• If the red area occurs on the pressure gauge,
  then you do not top up the pressure. It will
  indicate the higher issue, such as the
  non-functioning of the compressor or the
  malfunctioning.

7

• Thank you
• For more information visit us at-
• https//www.fixmycarac.com/services.php