Laboratory Fume Hoods Supplier

1
Application and Functions of Laboratory Fume Hood
2
The fume hood is the main equipment used in the
laboratory. This equipment ensures safety, as the
people who work with this equipment won't be
exposed to too many hazardous and dangerous fumes.
3
This is mainly done by keeping the air inside the
fume hood, which is kept away from the persons
conducting the tests. Previously these fume hoods
were made of wood, but nowadays due to the
advancement of technology they have changed and
are made of mild steel and coated with epoxy.
4
Design changes to these devices have been made to
ensure greater security. It is pretty obvious
that when experiments, testing or research are
conducted in a laboratory, there would be a
release of hazardous chemicals, so these fume
hoods will protect the user who would be involved
in conducting those experiments.
5
These are primarily used for industrial
application or places where hazardous gases,
vapors or dust are released. There are mainly two
types of fume hood recirculation and piping. The
basic principle of operation, for both fume hoods
is more or less the same.
6
The recycled fume hood draws the air around a
test into a built-in filter and expels the fresh
air that enters the laboratory or cabinet. A pipe
draws smoke from it and injects it into a
ventilation system, where it is purified and
released outside the building. Many fume hoods
are usually attached to such vent systems.
7
We are all well aware that laboratory equipment
needs some guidance to operate. These guidelines
are taken to ensure safety and protection.
Similarly, while using fume hood, the user must
be aware of toxic properties of the chemicals, as
there are chemicals that are over explosive, so
precautions must be taken.
8
Until and unless there is no indication given by
the machine that it is opening, the user should
not operate it. Other than this, the user should
check and compare the magnehelic reading and
compare it with the reading that is displayed on
the hood inspection sticker.
9
If the reading seems to be different from the one
that is displayed on the sticker, then there may
be a possibility that food hoods are not
operating sufficiently. It is essential to wear
gloves, safety goggles and keep the entire sash
clean and clear. It is very important to clear
chemical residues from the hood chamber after the
use.
10
Gaia Science provide the Purair Advanced Series
ductless fume hoods are available in 21 standard
sizes. This Series of high-efficiency products is
designed to protect the user and the environment
from hazardous vapors generated on the work
surface.
11
To Order Find Out More Information On Laboratory
Fume Hoods Please Come And Visit Us Today
Onwards..!
Gaia Science Pte Ltd Contact Us 102 E Pasir
Panjang Road, Singapore - 118529 Tel (65)
6276 8884 Fax [phone] Email
enquiry_at_gaiascience.com.sg Web
https//www.gaiascience.com.sg/