Top 5 Tips for Maintaining Laser Cutting Machines

1
sales_at_altparts.com
Top 5 Tips for Maintaining Laser Cutting
Machines The productivity and the longevity of
any equipment depend on the maintenance and the
way of its usage. The same is with laser cutting
machines. Equipment maintenance must be done by
the operators who regularly use the machine and
who are trained to do so, keeping in mind the
fragility of certain parts. In case, any part or
component needs replacement, it must be replaced
immediately. If you have an amada laser cutting
machine, then you can easily find amada machine
replacement parts online. Below are some general
maintenance tips that you can follow to extend
the life of your laser machine and prevent
production breakdowns.
Daily Inspection and Cleaning The simple thing to
prolong the life of a laser cutting machine is to
clean it regularly. The operators must clean the
machine after every job. You should empty slag
drawers and bins before starting a new cut.
Operators can use lint-free cloths or microfiber
towels to clean the parts of the machine. The
area around the laser machine should also be kept
clean.
www.altparts.com
2
sales_at_altparts.com
Ceramic ring and nozzle must be replaced daily to
have a precise and sharp cut. If the nozzle is
damaged by the laser beam then it must be
replaced promptly. You should always consider
using parts that are of good quality. Amada
machine replacement parts are of premium quality
so that your machine works at its best.
Cleaning Optics Different methods are used for
cleaning different types of lenses. For mirrors
with flat surfaces use lens paper and for mirrors
with curved surfaces use a cotton swab to clean.
Firstly, use a blower to blow the dust on the
surface of the lens. Then depending on the type
of lens take lens paper or cotton swab, moist it
with high purity alcohol or acetone, and rub
gently on the lens. Repeat this process several
times until the lens is fully cleaned.
Assist Gas Checks Laser cutting machines use gas
to operate. This gas assists the laser in
vaporizing through a material. If the gas is
contaminated it can greatly impact the quality of
the cut. So for smooth cuts, it is important to
have clean gas. Also, check filters to make sure
they are doing their job correctly. Leakage in
the gas bottles may compromise the safety of
operators and the surroundings. So to avoid
accidents change the gas bottle as soon as the
operators notice any leakage.
www.altparts.com
3
sales_at_altparts.com
Temperature Maintenance Laser cutting machines
vaporize metal using heat to cut materials. So,
keeping the equipment cool is of utmost
importance. Operators must check the system's
cooler regularly. Coolant levels, filters, and
fans need to be cleaned regularly so that they
can function properly. If the filters or fans are
covered in dust, they won't be able to cool the
machine. And it will lead to an increase in the
temperature of the machine. Further, it can also
damage the machine. So to prevent the machine
from getting damaged, operators must check the
cooling system regularly. In case of damage in
any parts of the machine, it must be replaced
with good quality spare parts like amada spare
parts.
Maintenance of Regulated Power Supply After one
month of regulated power supply, cut off the main
power supply and tighten all the connections in
the terminal and main circuit. Every three
months, check the elasticity of the carbon
sliding brush. Operators must use dry compressed
air to blow the dust gathered on the regulator.
www.altparts.com
4
sales_at_altparts.com
Conclusion You must have an effective maintenance
policy for planning, controlling, and directing
maintenance activities. The maintenance
department must have well-trained operators who
are well versed with the device. Any replacements
required in the machine must be instantly changed
for quality production. For spare parts of your
amada laser machine, you can google "amada spare
parts11 and find it easily online.
Source https//rentry.co/mvokz
www.altparts.com