With Non-slip Paint get good adhesion of the footwear - PowerPoint PPT Presentation

About This Presentation
Title:

With Non-slip Paint get good adhesion of the footwear

Description:

Non-slip paints have been specially manufactured for the industrial field, but they have spread to all types of constructions and even to home use indoors and outdoors. The Non-slip Paint provides good adhesion of the footwear to the ground even if it is wet. Order now! – PowerPoint PPT presentation

Number of Views:11
Slides: 6
Provided by: Liquiguard
Category:

less

Transcript and Presenter's Notes

Title: With Non-slip Paint get good adhesion of the footwear


1
Increase the life span of your wooden floor with
the wooden coatings
www.liquiguard.com
2
But for them to serve for a long time without
losing their functional and aesthetic qualities,
they certainly need protection. For a long time,
the most common option for protective wooden
coatings for wooden floors remained oil paint,
but in recent years they have begun to widely use
products that help emphasize the texture of wood,
give it the desired shade, protect against
various external influences. These include
parquet oils, varnishes, waxes, and oil-wax
mixtures. Varnishing Varnishes create a shiny
film on the surface of the floor, so this option
is not suitable for floors made of valuable wood,
where it is important to emphasize the beauty of
the texture.  But they perfectly hide small
surface defects, fill small cracks and cracks,
making the surface smoother. Cover the floors
with Varnish One- and two-component
water-soluble. The first is short-lived, after
1.5-2 years of operation, recover the floor. The
latter serve for a long time, but their cost is
an order of magnitude higher. Ensure the
attractive appearance of the coating when
applying the compositions in conditions of a
fairly high humidity level (at least 50) and
drying with the heating devices turned
off. Alkyd. Characterized by prolonged drying
but are well suited for surfaces that are often
subject to temperature changes or mechanical
loads. A good result is ensured by strict
observance of consumption standards, avoiding
heating and direct sunlight on the drying
surface.
3
Polyurethane. They have high wear resistance,
suitable for floors with increased intensity of
operation. When applying, there is a tendency to
form bubbles, so the moisture content of the wood
mustn't be more than 10. Humidity should also
not be high. Oil for wood Products based on
natural oils do not form a film on the surface
but are absorbed into the wood, due to which they
give it moisture- and dirt-repellent properties,
increase strength and wear resistance. The floor
with such a coating does not become glossy, but
remains velvety to the touch and acquires only a
barely noticeable shine. The oil maximizes the
texture of the wood, and if necessary, tones it
in one of the natural shades. Thus, wood
oil-based impregnations are best suited for those
cases where it is necessary to preserve the
natural appearance of the tree. In addition to
the above, oils have another advantage - a
completely environmentally friendly composition.
They do not contain toxic substances and salts of
heavy metals, so they are suitable even for
processing children's furniture and toys. If it
is necessary to update the coating, the varnish
must be completely cleaned and reapplied in
several layers, while to restore the oil coating,
it is enough to remove dust and dirt from the
surface and soak it with just one layer of
oil. A feature of the floor with oil
impregnation is the difficulty in care
immediately after application the surface must
completely dry before being subjected to active
use. As the composition dries and its penetration
into the wood, care becomes problem-free.
4
  • When oil should be preferred to varnish
  • When covering floors in rooms with a high level
    of humidity, as well as with significant
    temperature changes. For example, in unheated
    cottages.
  • When covering floors in wooden buildings located
    in the open air in gazebos, verandas.
  • If there is a "warm floor" system.
  • If the floor is made of exotic woods containing a
    large number of natural oils.
  • Wax and Oil wax mixture
  • Parquet wax mix with oil impregnation, in which
    case the floor looks beautiful. It perfectly
    protects the surface from dirt and moisture,
    protects wood from rotting, shrinkage, and other
    destructive processes associated with atmospheric
    influences. But wax is not adapted for intense
    load, so it is not suitable as an independent
    floor covering. That is why for the treatment of
    parquet it is often recommended to use oil-wax
    mixtures for the floor or oil with solid wax.
  • They allow you to use all the advantages of both
    wax and oils for wood emphasize the texture of
    wood, provide it with high resistance to
    mechanical and biological damage, abrasion, and
    contamination.
  • Whatever coating for the wooden floor you
    choose, remember that even you can protect the
    treated wood from temperature changes, moisture,
    and excessively dry air.
  • Like this, you can also use leather
    protection coating to maintain your most
    cherished leather items for a long time. To know
    more about this stay tuned with us!

5
Get in touch with us
Website www.liquiguard.comContact no 1
954-566-0996Email abbas_at_liquiguard.comCompany
address 5807 N Andrews Way, N/A, Fort
Lauderdale, Florida, 33309, United States
Write a Comment
User Comments (0)
About PowerShow.com