Industrial Uses Of Electromagnetic And General Flow Meters

1
Explain The Industrial Uses Of Electromagnetic
And General Flow Meters
Bio link
https//motorpumpwholesalers.wordpres
s.com/2021/12/09/electromagnetic-
flow-meters-industrial-uses/
Magnetic flow meters are instruments used to
measure the linear, nonlinear, mass, or
volumetric flow rate of the liquid and even gas
passing through. They are a common measurement
instrument used extensively in various industries
for over 60 years. Typically, these
electromagnetic and general flow meters are used
to measure the flow of all types of liquid,
filling, dosing, and precise measurement in the
custody transfer. The way it is going regarding
their requirement and usage, they are here to
stay in the future. However, one should keep in
mind that using electromagnets and general flow
meters on low conductivity fluids, like deionized
water, would cause the meter to turn off and
indicate zero flow. And that is why it
2
is critical one partner up with electromagnetic
flowmeter wholesalers to find reliable solutions
for your electromagnetic flow meter in Jaipur
needs. Typical Applications of Electromagnets an
d General Flow Meters
Sewage and chemical industry Electromagnetic flow
meters by the premier flow meter supplier in
Jaipur are widely used in various industries and
constitute about 24 percent of all
3
flowmeters sold in the market. Electromagnets and
general flow meters are commonly used in
wastewater, mining, and mineral processing as
they include custody transfer of liquids.
Electromagnets and flow meters measure the
treated and untreated sewage, process water, and
chemicals, and hence there is a high demand for
Flowmeter in Jaipur.
Mining and Mineral processing industry In the
mining and mineral processing industry,
electromagnetic flow meter supplier provides
flow meters that process water and heavy and
slurry media flows. With proper attention to the
construction materials, electromagnetic and
general flow meters can measure the flow of
highly corrosive liquids that are acid and
caustic, as well as abrasive slurries. Their
applications are commonly found in these
industries. Other usages Another application of
electromagnetic flow meters is when the liquid
is fed using gravity. In such scenarios, one has
to ensure that the orientation of flow meters is
such that it is filled with the liquid so that
it can take the proper measurement of the
flowing liquid substance. Failure to do that
could be detrimental to its purpose. Magnetic
flow meters are constructed so that only wet
parts of the device are the liner and
electrodes, which are made with materials that
can withstand corrosion. Their design is
obstruction-less to ensure that the liquid can
easily pass through without any loss of
hydraulic energy during the process. That is how
they are utilized in industries where corrosive
liquids are common.
4
A thing to keep in mind while using
electromagnetic flow meters in a vacuum as they
can collapse and get sucked into the pipeline,
which would catastrophically damage the ability
of the flow meter to take an accurate
measurement. These vacuum conditions, one should
note, happen when the pipes are not exposed to
vacuum service. The excessive temperature in
magnetic flow meters can also cause permanent
damage to the electromagnetic flow meter. And
that is why it is essential that one only shop
from a reliable Flow Meter wholesaler in Jaipur
to provide them with high quality
electromagnetic and flow meter solutions. Not
only the flow meter must ensure that it does not
impede the flow of the liquid (or even gas in
some cases), but it should not contaminate the
substance in any shape or form. The right flow
meter would do all that and use relatively low
power. It also must be capable of measuring
multi-dimensional flow so that it can be used to
measure both upstream and downstream
flow. Source Link https//motorpumpwholesalers.
wordpress.com