Title: varunkumar47 (1)
1Remanufactured Engines
2Remanufactured Engines
- Life cycle of remanufactured engines
- Are remanufactured engines worth it?
- How engines remanufactured?
- Remanufactured engine is good or bad
- Difference in remanufactured and refurbished
- Summary
https//autotechio.com/remanufactured-engines/
3(No Transcript)
4Life Cycle Of Remanufactured Engines
- Life cycle assessment is a method that is used to
assess the life cycle of remanufactured engines.
Basically, engine reproducing engineering was
investigated on these aspects which were energy,
material, and environment. Remanufacturing
engines were discussed in detail on the basis of
the application of LCA in a practical case. The
result shows that remanufacturing of engines can
save up to 50-60 kg steels, 8-10 kg of aluminum,
and 113 kWh energy power and reduce the emission
of 6 kg CO, 3.985 kg SO x, 1 kg NO x, and 288 kg
solid waste. The process of remanufacturing
engines is practically good and also great for
economic value.
autotechio.com
5Are Remanufactured Engines Worth It?
- If an engine is properly remanufactured, it
should be good as a new or better than the
original product and it should carry a warranty
for six months to one year. If you maintain it
very well, you might not have to worry about your
car engine for a long time. A remanufactured
engine gives you over 100000 miles of support. It
is cheaper than a fully rebuilt engine. And even
just maintaining the vehicle from time to time
servicing and doing some of the work on its own
will help keep that mileage up as well.
autotechio.com
6How Engines Remanufactured?
- Remanufacturing is a process in which component
of engines are taken apart, cleaned, repaired,
and then reassembled. - Old components of engines must be used, although
some of them can be new if the older parts are
defective. - Sometimes engine body gets damaged, but other
components are working well then working parts
put in the new engine body. - All material inside the engine like head and
block castings, crankshaft, camshaft and rods -
are carefully checked. - Remanufactured engine restored to as close to new
as possible.
autotechio.com
7Remanufactured Engine Is Good Or Bad
- In the sense of comfort remanufactured engine is
always good because you feel free after one time
of investment. - The remanufactured engine comes with a limited
period warranty that gives you assurance of
security. - Sometimes small parts could be the reason for
engine failure in that condition repairing is a
good option. - Remanufactured Engine gives you good mileage,
better performance and according to its
maintenance, it works long life.
autotechio.com
8Difference In Remanufactured Refurbished
Refurbished Remanufactured
Quality like new (or almost new). Quality like new or better than original product.
Comes with 3-6 months warranty. Comes with 6-12 month warranty.
Cost depend on refurbished parts. Cheaper than fully rebuilt engines.
Comes with original serial number. Comes with original or new serial number.
Aesthetic like new (or almost new). Aesthetic like brand new.
autotechio.com
9Summary
- Remanufacturing is a process in which components
of the engine is taken apart and then according
to their condition cleaned, repaired and then
reassembled, sometimes defective component
replace by the new one. The process of
remanufacturing engines is practically good and
also good for economic value. In the term of
engine remanufacturing, we can save energy,
material, and environment. A properly
remanufactured engine might be good as a new or
better than the original product. It gives you
over 100000 miles of support, if you maintain the
engine very well then it will help to keep that
mileage up as well.
autotechio.com