How to Calibrate Rotameter?

1
How to Calibrate Rotameter?

• A rotameter is a device that monitors the pace at
  which liquid or gas flows through a closed tube
  or pipe. Pump flow rates may be measured
  accurately and reliably using rotameters.

Visit- www.pcd-flowmeter.com
2
Calibrate Rotameter

• These secondary calibration standards can produce
  precise and consistent measurements of pump flow
  rates if they are regularly calibrated to a
  primary calibration standard. Rotameters are
  small, lightweight, robust, and portable devices
  available in various flow ranges to accommodate a
  broad range of air sampling needs.
• Scales that are simple to read
• Rugged and easily transportable
• Low-priced

Visit- www.pcd-flowmeter.com
3
What is the significance of rotameter
calibration?

• Because a rotameter is usually built for a
  particular gas density and flow range, accuracy
  will deteriorate if the rotameter is not
  calibrated to those circumstances.
• A rotameter must be calibrated to establish the
  reference circumstances under which the rotameter
  will operate to get the most accurate readings.
• The business case and return on investment for
  buying a rotameter calibrator or calibration
  systems, such as the Fluke molbox or the Fluke
  molbloc, and conducting the calibrations in-house
  may be compelling in some circumstances.

Visit- www.pcd-flowmeter.com
4
The following characteristics and capabilities
should be considered while studying rotameter
calibrators.
It is estimated that the flow reference is at
least two times more precise and has lower
uncertainty than the rotameter. Hardware for
adjusting the flow rate. There are no moving
components, and a constant volume offers the most
stable conditions for flow rates. Regulator for
line pressure (optional) Back Pressure Regulator
is used to set the pressure at which the
rotameter should be calibrated. Conclusion In an
ideal situation, a rotameter is built and
calibrated at the same temperature and pressure
as the process gas for which it will be used and
using the same process gas. This guarantees that
the gas density remains constant, but it is
frequently too difficult to recreate the precise
circumstances of usage in a laboratory setting.
It is also recommended to calibrate the actual
gas. If you want you to buy this please visit us
at pcd flowmeter.
Visit- www.pcd-flowmeter.com