Gear Couplings Italy - PowerPoint PPT Presentation

About This Presentation
Title:

Gear Couplings Italy

Description:

The low-wear, flexible gear couplings from Green Gear Transmissioni SRL are used in a wide variety of industries. We manufacture high-quality gear coupling products with a variety of designs and models that provide a long service life. – PowerPoint PPT presentation

Number of Views:39
Slides: 7
Provided by: ggtsrlitaly

less

Transcript and Presenter's Notes

Title: Gear Couplings Italy


1
Established in 2011, Green Gear Trasmissioni SRL
is a leading name in the manufacturing of speed
reducers, gears and couplings. We offer special
Gear couplings and spindles custom machined per
order. A gear coupling is a mechanical gadget for
sending force between two shafts that are not
collinear. Visit our website today.
2
GEAR COUPLINGS
Gear couplings in operation, under load, produce
resistance to axial sliding (translation of the
hub in the sleeve). This movement is opposed by a
force which is directly proportional to the
transmitted torque and inversely proportional to
the pitch diameter of the coupling gear teeth.
Besides, the axial force is linked to the
friction coefficient present in the gear teeth
according to the type of lubrication performed.
The friction coefficient may vary from 0,05 to
0,3. Ask GGT Engineering Department for further
details.
3
GEAR COUPLINGS
  • GEAR COUPLINGS TYPES
  • Standard GC
  • Heavy duty GC
  • Reverse hub/s GC
  • Rigid hub GC
  • Tubular spacer GC
  • Braking pulley GC
  • Safety GC with shear pins
  • Safety GC with modules
  • Safety insulation GC

4
GEAR COUPLINGS
  • GENERAL DATA
  • Nominal torque up to 16.900 kNm
  • Outer diameter up to 1800mm
  • FINISHED BORE TIPOLOGY
  • Keyway
  • Tapered
  • Splined
  • Shrink fitting and hydraulic removal

5
GEAR COUPLINGS
GEAR COUPLINGS COMPOSITION
The GGT (Green Gear transmissions Srl) Gear
Couplings of the FGC series are manufactured and
available made of quenched and tempered steel
AISI1045, AISI4140 or stainless steel AISI630.
Class 12.9 bolts, galvanized steel grease nipples
and o-rings in rubber NBR, Viton and/or silicone,
upon request.
6
Located in a strategic point in Italy and
surrounded by strategic suppliers, we are able to
respond to every requirement, guaranteeing
high-standard services thanks to our flexible
manufacturing process, full stock availability
and skilled collaborators.
Green Gear Trasmissioni S.r.l. Premises Via
Nazionale n83, Italy Tel. 39 0141 203522 Tel.
39 0141 203010 Fax 39 0141 1850491 Cell. 39
338 2013358 info_at_greengeartrasmissioni.com www.ggt
srl.it
Write a Comment
User Comments (0)
About PowerShow.com