how to install window ac?

1
How to install window ac?

• Visit our website

2
How to install window ac?

• How to install window ac? Air conditioner becomes
  a part of our life without ac we can live without
  it. We use it everywhere whether it is our
  office, home or our car.
• As we all know that is AC is very costly. We buy
  an AC which is suitable for us. Window ac is
  cheaper than split ac but if you damage it while
  installing it, it will be costly than split ac.
  So, proper guidance and instruction are very
  important. We have done lots of research and now
  we are here with our best instructions to install
  a window ac.
• Installing a window ac is not a big deal. But it
  can be highly risky if you didnt install it
  properly. It can damage your air conditioner, and
  if the damage is big, you have to buy a new AC.
  Its installation is very simple you can install
  it easily you just need only 2 people to install
  it.

3
How to install window ac?
4
The steps to install the window ac

• unwrap the air conditioner.
• Unwrap your AC carefully and make sure that you
  dont lose any part of the ac. It can be needed
  in the future.
• remove the front grille.
• Open the screws from the ac using a screwdriver
  and place the nut bolts at the safe place and
  make sure you dont lose it. It will be needed at
  the end.
• separate front grille.
• Separate the front grille from the ACs body and
  place it in a safe place.

5
The steps to install the window ac

• Remove ACs body and slide-out chassis of the AC.
• Remove the slide-out chassis from the ACs body.
  Make sure you dont damage the coil it will be
  expensive if you damage the coil of the slide-out
  chassis
• And now you have 3 things front grille, ACs
  frame, and the slide-out chassis.
• measure the ACs frame and cut the area where you
  want to place the air conditioner.
• Measure the area where you want to place your ac.
  Make sure the fame should be fit in that area. It
  should not be big or small it should be fit.

6
The steps to install the window ac

• drill the nut bolts.
• Put your frame where you want to place your AC
  and mark on the holes where you are to drill.
  Make sure to put the frame a little bend from the
  outside. because the water flows continuously
  from the air conditioner and no one wants that
  the wastewater came to our room. Then drill it
  and tighten the nut bolts. Nut bolts should be
  very tight because only those nut bolts hold the
  whole air conditioner.
• complete the installation.
• The parts which you have removed earlier now its
  time to put them back. Put the slide-out chassis
  on the ACs frame slowly and carefully. Because
  coils can be damaged. And then put front grille
  and tight the nut bolts. Now connect the wires.
• And here your installation has completed. Now you
  can use your air conditioner.

7
THANK YOU