Infrared Technology Burner | Burner Manufacturing Company

1
Infrared Technology Burner

• Innovation For
• Tomorrow's Business

2
How to Fix Common Problems in Infrared Gas
Burner?

• Its the weekend, and you have invited your
  friend circle for Party at your residence.
  Suddenly, you have turned on your grill, and it
  stops igniting. Like this issue, there are many
  common problems faced by infrared gas burner
  users daily. Some non-critical problems in
  infrared technology burner and other burners can
  be resolved by using a few appropriate methods
  discussed in this write-up.
• What Are Common Issues in Gas Burners and How to
  Fix Them?
• Lets go through some common issues with
  rectifying procedures to resolve gas burner
  problems that are discussed below.

3

• Squatty Blaze from Burners
• It is one of the top burner problems that you
  might have faced while cooking or heating. Most
  Gas tanks are equipped with an overfill
  protection tool to prevent the grill from being
  choked. It also senses the unwanted release of
  gas trapped in the line or manifold. When you
  resume the gas tank, the blaze will burn in a
  regular pattern. Have you ever seen uneven bursts
  when you manually light your burner? If yes, then
  clean burner holes filled with debris or soot and
  immaculate burner or venturi pipes to confirm no
  spider webs formed inside them. Few appropriate
  troubleshooting steps are given below to fix
  uneven blaze from burners.
• Be confident that the gas tank valve is switched
  off
• Put all grill knobs in the closed position
• Disengage the hose and regulator from the gas
  tank
• Unlock the grills hood
• Reset all of the control knobs to a high position
  for about two to three minutes to bleed out any
  gas that remained in the manifold

4

• Inspect for Spiders and Insects in Burners
• Scrutinize your burners carefully to search for
  spiders and insects available on them. These
  pests prevent gas from burning normally. It can
  trouble you by causing a fire behind the valve
  panel and making it unprotected to ignite.
  Investigate the burners every year if any such
  incident occurs.
• The burner flames appear yellow combined with an
  unusual smell
• The grill is not reaching the expected
  temperature
• The grill burns abnormally
• The burner makes a bursting noise
• The knobs get heated quickly.
• Recouple the hose and tank to the regulator
• Unseal the tank knob and turn slightly to
  pressurize the line
• Light your grill

5

• Grill Wont Ignite
• There are several factors why a grill wont burn
  with the spark generator. Try manually to light
  your grill if it is having this problem. If it
  ignites, then there is a problem in the Ignition
  system. Three spark generators are used to ignite
  the grill that is given below
• Electrical Ignition System This ignition system
  is managed with electricity. Examine if there is
  enough power flowing through your grill outlet or
  transformer in a working position.
• Battery Ignition System It is equipped and
  powered with battery or push-button igniters.
  When investigating, you must confirm that the
  ignition system set up has a new battery
  installed in it.
• Piezo It is not powered with electricity or
  battery but ignited with a hard burst.
• It would be best to inspect the crack in the
  metal tip or the correct alignment of the end
  with the electrode to the burner. Also, be
  confident if a grill burner is ignited with a
  matchbox. Procure igniter electrodes by removing
  cooking deposits or heat absorbers. The electrode
  may be installed in a collector box. When you
  turn on or tap the ignition switch, you will hear
  a quick burst or spark in the electrode. Place a
  flat head screwdriver on the electrode metal tip
  to look for the spark. If it is sparking, it
  means it is correct.

6

• Troubleshoot Yellow/Orange Blaze
• If your burner is ignited and burning with yellow
  or orange flame, it means that there is no
  appropriate mixture of air and gas or insects are
  trapped inside the venturi tubes.
• Examine for insects obstructing the gas pipes
• Loose the screw located at the end of the burner
  to allow the shutter to open or close moderately
• Burn the grill to see your flame pattern returns
  to original blue combined with yellow tips
• Once you have a blue flame, tight the screw to
  put the shutter as usual
• A yellow and orange flame is caused by an
  inaccurate gas mixture on the orifice. If you use
  natural gas, the excess of propane causes too
  much gas release from the orifice and creates a
  yellow flame.

7

• Less Heat Precipitation If the Knob Is In Full
  Position
•  
• Examine if the problem is outlined to only one
  burner. Clean the burner orifice and clear ports
  for any barricade
• Inspect for any curled or bent fuel hose
• Investigate if the air shutter is appropriately
  adjusted
• Examine for proper gas supply and pressure
• Preheat grill for 15 minutes
• Check empty gas tanks if using liquefied
  petroleum gas.
• gas efficient burners can be caught under
  multiple problems but dont panic because every
  hassle has a premium solution. Consult with a
  proper mechanic to troubleshoot all issues in the
  Gas burner.

8
(No Transcript)