Is electric brass parts beneficial?

1
Why Electric Brass Parts Are Popular Choice Now?
2

• You must have known that brass has been a common
  material found in households from time
  immemorial. Brass is nothing but an alloy that is
  common in making vessels and other metal parts.
  This alloy has a combination of copper and zinc
  which makes this material easy to forge. To make
  brass, copper gets first melted. Then, zinc is
  added to the molten copper. Since both metals are
  popular for their strength, the resultant brass
  is highly strong. Plus, it is a good material for
  various uses.

3
Is Electric Brass Parts Useful?

• If you take a good look around you, you would see
  that this metal is present everywhere. Whether at
  home or commercially, it helps with different
  things for different purposes. With this, you can
  make nuts, music components, sanitary fittings,
  and electric parts. And the best part is that
  this material has a really good sound quality
  making it the best choice for musical
  instruments. Also, brass is resistant to bacteria
  and other pathogens. This material is also good
  for knobs, plumbing fixtures, locks, and padlocks
  because of its anti-corrosive nature.
• From this, you can understand why manufacturers
  are choosing brass to produce electric brass
  parts. After all, they are resistant to fire,
  sustainable, and can take shocks in extreme
  conditions. Plus, this material is recyclable
  because about 90 per cent of the material can get
  recycled. Can you think of better material than
  brass for electric parts?

4
Brass in the Electrical Industry as Electric
Brass Parts

• Metals play a predominant role in both the
  electrical and electronics industry. Right now,
  many manufacturers show interest in brass
  electric parts because of their high strength and
  low conductivity. This is a good alternative for
  copper especially when pure copper is not
  necessary for a particular component. The 2 major
  brass parts now available are strips and wires.
  If higher conductivity is necessary, then the
  composition of zinc is accordingly changed.

5
Different Electric Brass Parts in the Market

• Brass rivets
• Fitting components
• Wire strip connectors
• Brass board and switch components
• Bolts and nuts
• Brass Electrical and electronic meter components

6
What to Consider When Buying Electric Brass Parts?

• There is no doubt that brass is the next
  generation metal that produces high performance
  when used in electric parts. Some of the factors
  that you need to consider are conductivity,
  formability, strength, and cost. Of course, you
  need to think of where you will use the parts to
  determine the right one for you.
• The amount of zinc present in the alloy affects
  the conductivity of the brass. But from a
  mechanical property view, you cannot gain much
  just by increasing the amount of zinc in brass.
• Brass is a cost-effective option because zinc has
  low metal value than copper itself. So, it is
  economical to use brass rather than pure copper.
  Best of all, brass has good resistance to
  corrosion than copper. This means that brass can
  withstand hours of salt spray without any major
  corrosions happening.
• For high-quality electric brass parts, make sure
  to buy them from a company that manufactured the
  parts under controlled industrial settings.

7
Electric Brass Parts A Sure Way To Success!

• Brass has wonderful recycling ability because you
  can get nearly 100 brass after the process.
  Scraps like brass anchors, LPG parts, cables,
  energy meter parts, and brass nuts are
  recyclable.
• No matter what electrical product, electric brass
  parts are the best out there for their quality
  and performance. With their superior properties,
  take your electrical products to the next level
  by choosing the right electric brass parts
  manufacturers.

8
http//www.asianfasteners.com/
mail_at_asianfasteners.com
Plot No. 3078, Road No.5, G.I.D.C.,PhASE-III Jamna
gar-361004 Gujarat, India.