3d scanning and printing Melbourne

1

Stereolithography (SLA) Printing

• It can be used for the creation of prototypes for
  new product development, medical sector and has
  many more applications with a relatively lower
  price.
• Materials Upload CAD FileVacuum Casting

2


SLA 3D Printing

• Stereolithography technique is an additive
  manufacturing process that is used for creation
  of parts layer by layer through the use of
  photochemical processes. In this process,
  chemical monomers and oligomers are cross linked
  to form polymers. An ultraviolet laser is focused
  on a vat of photopolymer resin with the help of a
  CAD software. The resin is solidified
  photochemically and a single layer of the desired
  part is formed. After that, one layer is lowered
  by the build platform and the tank is coated with
  the resin again. This process is repeated again
  and again until the part is completed. After the
  completion, the part is washed with the solvent
  in order to remove the resin off the surface. It
  is a very widely used 3D printing technology.

3
Major Benefits

gt Lower cost

gt Lesser print time

gt Large built size

gt Widely available

gt Smooth finish

• Uses
• It can be used for the creation of prototypes for
  new product development, medical sector and has
  many more applications with a relatively lower
  price.
• Medical Sector
• SLA can be used in the creation of 3D model of
  the various regions of the patients body through
  the use of CT and MRI scans and subsequently it
  can help in the planning and designing and
  manufacturing of the implant.
• Prototype Creation
• This technique is widely used for the creation of
  prototypes in a relatively low price and high
  accuracy. It can be used for the creation of
  complex shapes.

4
SLA Printing Methods
5
Thank You

• Perth
  
• 197 St Georges Terrace, Perth, WA 6000
• For visit make an appointment
• 61 1300 143 540
• 61-0406163997
• info_at_caddeziners.com.au