FIX Total Identified Windows Installations 0

1
Prompt Resolve promptresolve.com
12/8/2020
FIX Total Identified Windows Installations 0
Prompt Resolve
FIX Total Identified Windows Installations
0 Windows users generally face many issues while
using it. There are some very frustrating
Windows errors that cant be solved easily until
you boot your computer properly and this is a
very difficult task.
of the most common error messages is Total
Identified Windows Installations 0 which
appears when your file system integrity is
compromised. Whenever this error occurs, try to
find the cause of issue and proper methods to
troubleshoot the full screen windows 10 Common
causes for Total Identified Windows
Installations 0 Error Mainly the total
identified windows installations 0 windows 10
problem is caused by following two reasons on
your computer and knowing these may help you to
avoid the error in future.
File system integrity is compromised This error
can be caused when you switch off your
?
system abruptly while booting it. This can causes
your file systems to be corrupted or damaged
2
12/8/2020
FIX Total Identified Windows Installations 0
Prompt Resolve
and thus generated this error.
Corrupted or missing Binary-Coded Decimal (BCD)
It is one of the main causes of this
?
problem as it cannot be controlled in any
situation. These issues includes power outages,
booting sector viruses affecting the PC, disk
writing issues, or any problem that occurs while
manually configuring the BCM. How do I fix
Total identified windows installations 0
problem This message basically indicates that
bootrec of your system cannot find any additional
installations of Windows in it to add to the
BCD. You can resolve this by applying any of the
following methods Method 1 Repair BCD You can
rebuild BCD using some commands to solve your
problem. For that, all you need to do is
First of all, create a Windows 10 bootable USB
drive using Media Creation Tool. Change BIOS boot
order from USB flash drive to boot.
?
?
3
12/8/2020 FIX Total Identified Windows
Installations 0 Prompt Resolve
Now a Windows setup page will appear on your
screen, here you need to choose your
?
language preference. After that, click on the
Next button to continue.
Go through Repair your computer gt Advanced
Options gt Troubleshoot gt Command
?
Prompt.
Input the bootrec /rebuildbcd command and press
the Enter key to move further. After this
?
the total identified Windows installations 0
error message will appear on your screen. Dont
Panic. All you need to do is follow the
step-by-step guide given below to continue.
Type each of the following commands and press
Enter after each bcdedit /export
c\bcdbackup attrib c\boot\bcd -h -r s ren
c\boot\bcd bcd.old bootrec /rebuildbcd
?
The above commands will generate Total identified
Windows installations 1 message and
?
will ask whether you want to add the installation
to boot list. In such a case, press Y and hit
Enter. After successfully executing the above
steps, this error will be removed from your
system. Then you have to restart your computer
and check if you can boot it normally. Method 2
Perform System Restore Windows has a System
restore built-in feature that enables you to
restore your system to an early state. So System
Restore can help you to fix many system repair
issues. For that
Right-click on My Computer Icon and choose
Properties from the drop-down list that
?
appeared on screen. Now navigate to the System
Protection tab that helps you to restore the
window.
4
12/8/2020
FIX Total Identified Windows Installations 0
Prompt Resolve
To create a restore point manually, click on the
Create button to set one for later use.
?
Alternatively,
5
12/8/2020
FIX Total Identified Windows Installations 0
Prompt Resolve
Firstly, boot from the bootable USB flash drive
that you have created earlier. Go through
following Repair your computer gt Advanced
Options gt This will open the
?
?
Advanced options page.
Now, click on the System Restore option and
follow all the on-screen instructions to revert
?
your system to a normal state using system
restore points. Method 3 Repair Registry
Entries Recovering the registry can help you to
solve many Windows issues. You can even use this
method to repair the necessary files on the PC.
You can fix it by following the steps below
Go through Repair your computer gt
Troubleshoot gt Command Prompt to open the
?
command prompt while restarting the system.
Type the following command diskpart gt list vol
to find out which partition holds the system
?
registries.
6
12/8/2020
FIX Total Identified Windows Installations 0
Prompt Resolve
Now type the below command xcopy c\windows\syste
m32\config\regback
?
c\windows\system32\config. This will copy the
necessary registry files from your system before
booting. If none of the above solutions helped
you in solving the issue, then uninstall the
Windows from your system.