Canon Pixma MG3000 Setup Guidance

1
Canon Pixma MG3000 Setup
2
Canon Pixma TS202 Printer

• The Canon Pixma MG3000 setup process begins with
  unboxing, connecting the power cable, setting up
  the date, time, region, and country, and
  installing the ink cartridges. You do these
  processes to set up the basic functions of the
  Canon Pixma MG3000 Setup.

3
Canon Pixma MG3000 Unboxing Guidance

• Unseal the top portion of the printer box using a
  knife.
• Take the cartridges out of it and keep it aside
  inside the packaging.
• The Canon Pixma MG3000 setup uses 545-Black and
  545-Color cartridges.
• You can see a user manual, installation CD and a
  power cable on the top of the printer.
• Keep the printing machine on a table or a flat
  surface and remove the cover on it. Also, remove
  all the red tape on the printer, the cartridge
  access area, and from it rear.

4

• Now, take the power cable, insert the plug-end
  into the direct electrical wall outlet and the
  alternate end at the rear port of your Canon MG
  3000 printer.
• Power on the printer
• This printer does not have an LCD display and so
  setting up your preferences can be done in the
  driver settings.
• Push the input tray and open the cartridge door.
  Remove the orange protective tape stuck on both
  ink cartridges and insert one by one into the
  respective slot.

5

• Insert a plain paper into the input tray
  immediately after the ink cartridge installation,
  so that the printer prints a calibration page
  confirming that the ink cartridges are well
  seated.
• After this, you must install the printer software
  by choosing a network of your choice. This
  completes the printer setup.

6
Reference

• Click Here -gt Canon MG3000 Driver Manual
  Download
• For More -gt https//usa-canon-printer.support/can
  on-pixma-mg3000

7

• Thank You!!!