smiths299 (2)

1
Dell Printer Error Code 092-673
https//www.delltechnicalsupportnumber.com/blog/ho
w-to-fix-dell-printer-error-code-092-673/
2
How to Fix Dell Printer Error Code 092-673 ?
Fix Dell Printer Error Code 092-673, 092-670,
092-671, 092-672 Generally Dell Printer Error
092-670, 092-671, 092-672, 092-673 are known as 
Calibrating Patch Errors. It is a common issues
on Dell laser printer C2660dn / C2665dnf / C3760n
/ C3760dn / C3765dnf . Steps to Fix Dell Printer
Error Code 092-673, 092-670, 092-671,
092-672 Step 1. Clean the sensor for CTD 1. Make
sure the printer is switched off.2. To open the
back cover, push the latch down.3. Open the
cover on the correct hand.4. Turn the 90-degree
counterclockwise waste toner box lock button to
unlock the waste toner box.5. Capture the grip
on the box of the waste toner and pull it out to
ensure that it is held upright so that the waste
toner does not spill.6. Stand upright on a level
surface the removed waste toner box.7. Lift the
panel for the operator.
3
8. Open the cover at the top.9. Put your fingers
on both sides of the belt unit through the loops
and pull it out.10. Use a clean, dry cotton swab
to clean the CTD sensor (as shown). Step 2.
Clean ROS To avoid impression quality from
deteriorating owing to stains inside the printer,
frequently clean inside the printer using the
cleaning rod when replacing drum cartridges. 1.
Open the cover on the correct hand.2. Turn the
90-degree counterclockwise waste toner box lock
button to unlock the waste toner box.3. Capture
the grip on the box of the waste toner and pull
it out to ensure that it is held upright so that
the waste toner does not spill.4. Stand upright
on a level surface the removed waste toner
box.5. Remove from inside the printer the
cleaning rod.6. Insert the cleaning rod
completely into one of the four holes until it
clicks as demonstrated below into the inside of
the printer and pull it out.7. On the other
three holes, repeat step 6 as well. Insertion of
one moment is sufficient for each hole.
4

• Step 3. Replace the Imaging Drums
• If the error remains, it is necessary to replace
  one of the image drums. To determine which drum
  should be substituted, check the respective error
  codes.
• 092-670 Yellow
• 092-671 Magenta
• 092-672 Cyan
• 092-670 Black
• Update the firmware after replacing the drums.
• Please contact Dell Technical Support if these
  measures do not correct the issue.
• If you are unable to fix Dell Printer Error
  092-670, 092-671, 092-672, 092-673 Calibrating
  Patch Errors on the C2660dn / C2665dnf / C3760n /
  C3760dn / C3765dnf on Dell Laser Printers, just
  dial for Troubleshoot Dell Printer Error 092-673
  on Dell Laser Printer

5
(No Transcript)