Shaver Post Driver

1
Shaver post driver HD-10 hydraulic post driver
Ford Distributing Description Shaver Post
Drivers are designed to fit on a tractor or skid
steer loader. Hydraulic power controls the post
driving process. Shaver Post Drivers are
efficient and reliable, and are used by
professional fencing contractors. Details Shaver
post drivers are used by professional fencing
contractors and farmers to install and maintain
fence lines. Drive posts quickly and efficiently
using the tractor or skid steer hydraulics. Easy
mounting and operation allows the operator to
drive posts quickly and efficiently. The post
driver has a tilt and offset function to drive
posts vertically every time. Shaver post drivers
can be mounted on a tractor or skid steer loader
and are powered hydraulically. Oil from the
tractor hydraulic system raises a spring loaded
driving ram. At the touch of a lever on the
hydraulic valve, the oil dumps back into the
tractor reservoir and the spring loaded ram
strikes the post, driving it into the ground. The
operator has complete control over the driving
operation. The post is held in place with a
spring loaded safety arm, allowing the operator
to stand well to the side of the driving
operation. Gentle blows start the post into the
ground. All Shaver drivers tilt and offset to
make driving a vertical post easy. The tilt and
offset functions are handled mechanically with a
screw crank system, or hydraulically with the aid
of cylinders. In extreme conditions, a pilot
auger (4" diameter) can be mounted to the driver.
The pilot auger hole allows a post to be driven
into very hard ground. There are three models of
driver to choose from. Commercial fencing
operators will want to choose either the HD-10 or
HD-12 model. The HD-10 delivers 70,000 lbs of
impact and can handle posts up to 8.75" in
diameter. It requires 12 gallons of flow per
minute at 1,500 psi.
Contact us to know more about our brand new
products https//forddistributing.com/shaver-hd-1
0-post-driver-mechanical-tilt-and-offset.html