PROCESS OF REVERSE ENGINEERING BY TOP COMPANIES IN DUBAI

1
PROCESS OF REVERSE ENGINEERING BY TOP COMPANIES
IN DUBAI
http//www.falcon3dme.com/
2

• Reverse Engineering is the process of
  redeveloping the original product with its exact
  measurements of dimensions. The need for reverse
  engineering arises in the case if the
  manufacturer doesn't exist or make that
  particular product. The fact is that the entire
  process of reverse engineering can be highly
  time-consuming and challenging.
• However, using 3D scanning for reverse
  engineering can be efficient. It generates a 3D
  CAD model from the original product by capturing
  millions of measurement points. It is said to be
  an extremely beneficial and cost-effective
  process. The below-mentioned details would
  describe the step-by-step process of 3D reverse
  engineering used by several mechanical
  engineering companies in the UAE.

http//www.falcon3dme.com/
3

• Preparation to ensure the accuracy
• For increasing scan accuracy, sprinkle the
  temporary matte powder on the product. The
  quality of the scan can be affected even by a
  little shining surface. Kindly, note that without
  a matte coating, transparent and reflective
  surfaces can't be scanned.
• Scanning the critical sections
• For capturing the critical sections of the
  product, always use a highly accurate 3D scanner.
  Many engineering companies in Dubai use laser
  scanners, as it is considered an ideal tool that
  provides a hundred percent accuracy. If the
  product has deep holes, multiple rescanning and
  orientation are required.

http//www.falcon3dme.com/
4

• Processing to bring the finishing
• Small gaps can be repaired, and the scan can be
  simplified using scanner software. By doing this,
  the data can be easily managed in CAD. Therefore,
  without damaging the essential details, try
  reducing the model as much as possible. The next
  is to import the data into the CAD software that
  has tools for reverse engineering.
• Surfacing to ensure perfection
• For creating a robust model that can be edited
  using CAD, there are three ways to extract the
  essential surfaces and are described below.

http//www.falcon3dme.com/
5

• Semi-automatic surfacing
• It is quite challenging to draw the complex
  curved surfaces manually. Hence, semi-automatic
  surfacing seems ideal. Surfaces that fit the best
  with the model are generated using this type of
  surfacing.
• Automatic surfacing
• From any watertight scan, a solid model can be
  generated using automatic surfacing. For any
  addition or subtraction, standard CAD tools can
  be used. However, it is not easy to alter the
  basic characteristics. You will notice after
  comparing the results of the above two types of
  surfacing that the model is a little less
  accurate, particularly around fine edges.
• Manual redrawing
• Manual redrawing is considered the most accurate
  and quick way for features like pockets or holes.
  The scan model can be used as a reference for the
  same.

http//www.falcon3dme.com/
6
Integration Print

• For creating the jig that holds the original
  product, the scan can be subtracted from another
  solid body, once it has been converted to a
  solid. The dimensions of the scan are the
  reference for the new product's design. The last
  step is to print that jig using a highly accurate
  3D printer, and the final reproduced product is
  ready for use.
• Hence, if you are looking for the right place to
  ensure the perfect process of engineering
  companies in Dubai, Falcon 3D is the right place
  for you. Reach out to the company to get the best
  assistance at all times.

http//www.falcon3dme.com/
7
Contact US
For more Details Contact Us Phone 971 (0) 4
327-1414 971-4-388-6888 Fax
971-4-327-1413 Email info_at_falconsurveyme.com
Office Address 209, Apricot TowerDubai
Silicon OasisP.O. Box 238544, Dubai United
Arab Emirates
http//www.falcon3dme.com/contact.html
8
(No Transcript)