Load Balancing – Smart Energy Management by Noodoe

1
Load Balancing Smart Energy Management by Noodoe

• During this Electrification era Transport sector
  has been growing exponentially. Due to which we
  have seen a large number of electric vehicles on
  roads. In addition, this has proved to be an
  opportunity for business owners to keep up with
  the ever-increasing demand of charging electric
  vehicles. The business owners of many EV Charging
  stations have discovered major impediments
  related to the framework that was created in the
  pre-electrification era.
• The biggest problem is the pre-electrification
  era design of parking structures, which were not
  able to provide enough power to charge up
  Electric Vehicles.
• This problem is two-fold
• Power panel boxes installed are not efficient to
  provide enough power simultaneously to large
  number of EV Charging stations.
• The electric companies may not be immediately
  ready to source enough power to these EV
  charging stations without fundamental change in
  their design. However, this change either
• could be very expensive or is not possible at
  all.
• Therefore, Load Balancing can help to solve this
  problem of fulfilling enough power to all EV
  charging stations via Smart Energy Management
  service offered by Noodoe Corporation.
• What is Load Balancing?
• Load Balancing enables you to install number of
  EV Charging stations with an unaffected electric
  capacity. Under this process, electricity is
  distributed among all Electric vehicles equally.

How Load Balancing works via Smart Energy
Management from Noodoe Corp?
2
Without Noodoe EV Smart Energy Management,
although this location has more spots available,
it is only able to install four 32A charging
stations due to the limits of the electrical
capacity of 160A at the existing site. Let us
understand this with an example that how Noodoes
EV Smart Energy Management allows for installing
6 EV charging stations by dynamically shifting
energy to vehicles that need it most, while
constantly monitoring and maintaining the total
load under the limit of the electrical panel.

• In the image above it is clear when the first EV
  comes in, it will be charged with full 1 power
  of 32A.
• When additional EVs comes in 2nd EV, 3rd EV,
  and fourth EV, they are all charged at full
  power of 32A. The system at this point is drawing
  the full available power for charging EVs.
• However, as the fifth EV comes to the picture,
  the Smart Energy Management starts to kick in.
  With this innovative Noodoes Technology the
  output for each EV is calculated and
• adjusted to provide equal power (26A) to every
  vehicle and help the electric power to stay
  within the limit of the electric panel. Here, the
  Noodoe EV smart management system sends
• the important instructions to the EV chargers, it
  continues to dynamically monitor the consumption
  rate of each charger to ensure compliance, and
  makes any essential changes in real time to
  ensure that each Electric Vehicle is charged to
  the optimum and side by side
• keeping the total output under the limit of 160A.
• As and when the sixth EV arrives and charged
  simultaneously with other 5 EVs, the output to
  each EV will be calculated again and dropped to
  22A. Noodoe EV Smart Energy

3
Management continue to monitor the power
consumption and adjusts the output accordingly
as more energy becomes available when other
chargers complete energy transfer. 5. When Noodoe
EV Smart Energy Management detects that an EV is
fully charged and no longer requires power, e.g.
when the first EV is charged fully and leaves,
Noodoes Smart Energy Management System will
increase the energy output from 22A to 26A across
the remaining five charging vehicles
automatically.

• Key Features
• Utilizes smart algorithms and intelligent
  monitoring of chargers to balance their
  electrical usage while ensuring that total
  electrical output stays within safe range.
• Eliminates the need for electrical upgrades.
• Doesnt require additional physical wiring for
  implementation.
• Optimizes the usage of available power from the
  utility, while protecting the local electrical
  systems from dangers of overloading even when
  multiple chargers are being used simultaneously.
• Offers flexible implementation options to suit
  your ideal number of chargers.
• Article Source - https//www.noodoe.com/load-balan
  cing-smart-energy-management-by- noodoe/