Learn How To Use Rust Removal

1
Learn How To Use Rust Removal
https//cortec-me.com/
2
ABOUT

• Once the metal tool contains some level of water
  and stays there, the oxidation process takes
  place and make your tool rusty. But this is not
  the end. There are plenty of methods to make the
  tool or machinery rust proof.
• We have discussed a few of the most common rust
  removal methods. These are DIY methods. But if
  you are suffering from heavy dust issues, you
  should hire rust to remove in UAE. They can
  fulfill your requirement and remove the rust
  quickly.

https//cortec-me.com/
3
Rust Removal Method

• Baking Soda
• This is the oldest method to clean the rust from
  the tool. Make sure the baking soda covers all
  the rusty parts. Once you apply this product on
  the tool, keep it as it is for an hour and then
  scour the product with steel wool or a metal
  brush. With this practice, you can easily remove
  the rust from the metal. To clean the metal, you
  can use a dry towel.

https//cortec-me.com/
4
Vinegar Bath

• If you want to remove rust with the help of this
  method, then you have to submerge the metal
  product in white vinegar and keep it as it is for
  a night. Now use a metal brush or steel wool to
  remove the rust from the metal. Many people have
  tried this method to remove rust and they have
  got the success.

https//cortec-me.com/
5
Potato and Dish Soap

• Some people will think that whats this? But
  trust me, many people have tried this method and
  got tremendous success to remove the rust from
  metal. Just cut your potato half and cover the
  open end with the help of dish soap. Now rub the
  potato over the rusty part of the metal and keep
  it as it is for an hour. Then clean it with a dry
  cloth. You might see a miracle.

https//cortec-me.com/
6
Citric Acid

• This method might not be suitable for everyone
  because Citric acid is not a commonly used
  product. But if you want to try this method, you
  can buy Citric acid from the health food store.
  Take two to three tablespoon of citric acid and
  add some amount of water in a bowl. Make a
  mixture. Now put your metal product inside this
  mixture and keep it overnight. Scrub the rusty
  part in the morning with a brush. And you might
  get the best result.

https//cortec-me.com/
7
Call the Professional

• If none of the above methods works and if you are
  searching for a good solution, hire the
  professional rust remover in UAE.

https//cortec-me.com/
8
CONTACT US
For more details-
Tel [phone] FAX - 971 4 434 0668
EMAIL ID - inquiries_at_cortec-me.com
Cortec Middle EastSidra Tower, Office
1307Sheikh Zayed Road P.O. Box 115133 Dubai,
United Arab Emirates
ADDRESS-
https//cortec-me.com/contact/
9
(No Transcript)