Why is your Pool Pump not Circulating Water

1
Why is Your Pool Pump Not Circulating Water?
2
The pump is one of the most important elements of
your pool filtration system.
3
The pool pump works for keeping the water clean
and safe.
4
There are several other reasons for your pool
pump not circulating water.
5
Low water level
6
The water level in your pool is extremely
important in terms of proper filter operation.
7
The filter is designed to run in a vacuum
situation with water filling the entire system.
8
If air enters the system, the motor can become
damaged.
9
Running the pump without water
10
Swimming pool pumps should never operate without
water.
11
They will overheat and can also warp the lid,
basket and the adjacent plumbing.
12
There is a high possibility of causing damage to
the plate, seal and bearings.
13
Cracked pump lid
14
Sometimes the lid can get a small hairline crack
that can be hard to notice.
15
Although your pump may operate as usual,
sometimes air can be sucked in.
16
When air is pulled into the pump it can cause it
to dry and overheat.
17
Dirty filter
18
Water will fail to circulate when the filter
system has become dirty and clogged.
19
Filters become dirty with the particles and small
debris that collects.
20
Backwashing your filter is necessary when the
pressure gauge raises 8 to 10 psi past its normal
operating pressure.
21
A leak in your pool pump
22
There are 3 types of leaks that can commonly
occur at the pump piping connections and the
motor connection.
The suction side is under a vacuum.
The discharge side is under pressure.
A leak can occur where the electric motor
attaches to the pump.
23
Visit Us
https//spearpoolrepair.com/