What is the most suitable cleaner during stainless steel?

1
Several Cleaning Methods for Your Door Handles
and Hinges
2

• Admit it. You never thought of cleaning door
  handles before coronavirus pandemic. We all
  ignored that we likely to use door knobs and
  handles every day without cleaning them
  generously. We keep our home neat and clean but
  never pay heed to our door handles who may be
  infected with viruses and germs due to frequent
  use. The built-up grime, dirt, and micro bacteria
  can reach to you to make you sick. An average
  small house has minimum two dozen knobs, hinges,
  and knockers that people neglect to clean.
• Here, Olive Worlds experts understand that
  cleanliness and the beauty of your doors is
  critical and so the solid security. In this post,
  we will talk about important tips to clean the
  most common materials that hinges, door knobs,
  and knockers are made from. Wear your gloves and
  get ready to clean those things with the basic
  cleaning solution that you likely prepare at
  home.

3
What Things to Consider Before Cleaning Copper
Brass Door Hardware

• Brass and Copper are the two main and mostly used
  metals by door handles manufacturers to craft
  hinges and door handles that are used in modern
  homes. While both the metals are prone to
  tarnish, they can be cleaned easily at home. You
  should find out which metal is used to make your
  door handles. Is the hardware solid copper or
  brass or does it coated with lacquer.

4
Solid brass or coated door knobs

• Before you start cleaning your brass based door
  hardware, you must detect if it is a solid brass
  or brass-plated steel, iron, or zinc. Brass
  plated hardware should be cleaned with warm soapy
  water mix. Use of scrubber will damage the coat
  and make your door hardware look ugly. You can
  simply put magnet to check the material type. If
  it sticks to the hardware, it is brass-plated
  product. Magnet doesnt stick on brass.
• If the door hardware is layered with glossy
  finish, you cannot get succeed in cleaning the
  subsurface material with your basic mix. To
  remove clear coats and work on the polish, you
  can apply mineral spirits or similar solvents.
  You can always re-apply the clear coating once
  you achieve the shiny clean hardware.

5

• There are two solutions that you can prepare at
  home to clean brass and copper door knobs.
• You can create a paste from flour, vinegar, and
  salt. Take the ingredients in same ratio. Gently
  scrub with the paste onto your solid brass and
  copper door handle and let it sit for few
  minutes. After some time, you can use a soft
  cloth to buff the paste off to achieve a shiny
  hardware.
• Take a lemon and cut in half. Coat the open side
  of lemon with salt and scrub the brass and copper
  hardware surface to remove dirt, tarnish, and
  bacteria. Wipe the surface with clean cotton rug
  to remove residue.

6
Things to Consider to Clean Stainless Steel Door
Hardware

• Getting stainless steel shine back is a tricky
  part of the job. Before starting the cleaning
  process, you must be aware of the things you
  should not do to avoid damaging stainless steel
  material.
• Main no-nos for stainless steel-
• Avoid chlorine bleach use or products with
  chloride
• Never use steel wool and other abrasives
• Never apply oven cleaners
• Never use hardwater
• Never clean warm stainless steel hardware

7
How to clean stainless steel

• The best way to have a shiny stainless steel door
  hardware is to use a soapy water mix. You can
  wipe the grime with soft cotton rug dipped in the
  soapy mixture and then rinse with clean water.
  For stubborn residue, you can use old toothbrush
  as it wont scratch the stainless steel surface.
• Tarnish word is taken from an ancient sense of
  things darkening. The term tarnish can be
  traced back beyond French and through to
  Proto-Germanic (European Language). It is nearly
  related to the work dark.
• Tarnish is a layer of corrosion affecting a few
  metals. It is just like rust damaging the iron.
  Tarnishing occurs in metals like aluminum,
  copper, brass, and silver. The metal loses its
  bright color and relativity. Moreover, if you
  dont remove the tarnish from these metals, it
  will turn the surface layer look grey and black.
  
• Door handles are usually coated with protective
  layer to prevent tarnishing of metal. Tarnish is
  generally caused when metal comes in contact with
  air and airborne chemicals and sulfur.
• So these are some useful yet basic cleaning tips
  to give your door handles long-lasting
  impression. You can even replace your tarnished
  door hardware with brand new products. Many
  manufacturing units are providing buy-back
  benefits and exchange offers. Find the best
  reliable local door handles suppliers in your
  area and ask if they can provide you new product
  in exchange offer. This will save a lot of money.
  

8
91 261 2841532 / 2840008 91 261 2840057 / 58
www.oliveworld.com
EVERSHINE APPLIANCES PVT. LTD. Plot No. 41,
Ichhapore GIDC, Opp. ONGC, Near GAIL,
Sachin-Hazira Road, Bhatpore Village, Surat - 394
510 (Guj.) INDIA. CIN U27108GJ2004PTC044421