How CI Foot Valve Regulates The Fluid Flow?

1
HOW CI FOOT VALVE REGULATES THE FLUID FLOW?
2
INTRODUCTION

• A CI foot valve is a necessary device that helps
  to hold the backward water flow into the sump.
  Most foot valves usually come outfitted with an
  inlet strainer.
• The strainer filters the water entered in it,
  preventing debris trash in the water of the
  well from getting into the pipe and obstructing
  the valve, clogging it in the open position.

3
THE NEED FOR CI FOOT VALVE

• In the process involving pulling of water from
  ground level, or in pumping fluid up from the
  sumps on the ground to the water storages over
  the multi-storied buildings, powerful electronic
  pump motors are employed.
• These electronic motors normally work by
  generating a suction that pulls the water up with
  the help of the water pipe at the needed height,
  where it is collected or stored for further
  distribution. 

4
HOW CI FOOT VALVE FUNCTION?

• A CI foot valve also identified as a GM check
  valve. Check valve is a one-way valve, that is,
  it opens in only one direction. It enables only a
  unidirectional flow and closes off when the
  direction of flow changes backward. 
• Most CI foot valve is spring-loaded. So when the
  pulling power is removed, the springs in it pull
  it to shut tightly, making sure that the pipe is
  entirely sealed off, efficiently preventing any
  backward flow of water back into the ground well
  when the pump is switched off.

5
CONTACT US

• We are an ISO 9001 company, established in March
  2012. Ranjit Marketing resell and trade different
  types of valves fire fighting extinguishers.
  Visit Ranjit Marketing
• ADDRESS
• DELHI OFFICE B-73, Fateh Nagar,
• Jail Road, New Delhi-110018
• 8506905100, 7838241205