Abrasive Blast rooms

1
Abrasive Blast Rooms
2
Abrasive Blast Rooms
Abrasive blast rooms offer a lot of advantages
when blasting large parts and when using a
re-usable media such as Aluminum Oxide or Steel
Shot. These rooms provide an area that can
collect the media, send it to a recycling and
separating system and then be re-blasted. Blast
rooms can also be equipped with exhaust and dust
collection systems. The major drawback is the
cost typically in excess of 100,000.
Abrasive Blast
Visit us _at_ https//www.kramerindustriesonline.com
Follow us _at_
3
An alternative to a blast room is to perform the
abrasive blasting in either an outdoor area that
is closed in or to blast in a separate room
such as a garage or shipping container. These
areas can be set up to contain the media and dust
but will limit the media choices to consumable,
less expensive blasting media such as Crushed
Glass Grit. In order to use a re-usable media,
a system such as the Blast Room Package is needed
to collect, separate, clean and blast the media.
Simply sweeping the used media, dust, dirt, paint
chips, etc. into a feed hopper will transfer the
recycled material to the abrasive separator,
clean out large pieces, remove the dust and send
the good media to the pressure pot for
re-blasting. The Blast Room Package can simulate
nearly all the benefits of a full-fledged blast
room but at a fraction of the cost.
Visit us _at_ https//www.kramerindustriesonline.com
Follow us _at_