mpiservicesusa123

1
Magnetic Chucks For Grinding
2
Types Of Magnetic Chucks

• Rare Earth Surface Grinder Chuck
• Rare Earth Compact Milling Chuck
• Electro Permanent Mastermill Milling Chuck
• Rare Earth Round Chuck
• Double Rare Earth Round Chuck
• Double-Ceramic-Round-Chuck
• Pneumatic Switchable Permanent Magnet

3
Rare Earth Surface Grinder Chuck

• The MPI Rare Earth Surface Grinder Chuck offers
  exceptional holding force combined with high
  quality and favorable pricing. It is a simple,
  low maintenance clamping device primarily used as
  an accessory to grinders intended for precise
  surface grinding of very small, thin parts up to
  large workpieces and electrical discharge
  machining (EDM).

4
Rare Earth Compact Milling Chuck

• The MPI Rare Earth Compact Milling Chuck is used
  for milling, drilling or heavy grinding of
  relatively small workpieces that require a
  significant holding force and stability required
  for clamping.

5
Electro Permanent Mastermill Milling Chuck

• The MPI Electro Permanent Master mill Milling
  Chuck is a versatile magnetic chuck for milling
  and drilling of both small and large workpieces.
  Using pole extensions, the material can be
  machined from five (5) sides, drilled through,
  and uneven material can be machined as well. For
  optimum holding force, the required workpiece
  thickness is at least 0.47 in.

6

Rare Earth Round Chuck

• MPI Rare Earth Round magnetic chuck is a suitable
  tool for clamping different workpiece shapes
  during grinding, as well as turning operations.
  The possibility to adjust the holding force
  greatly facilitates centering of workpieces. Due
  to the low and very stable magnetic field you can
  clamp relatively small and thin workpieces. The
  top plate is made of one solid unit, providing no
  risk of coolant leakage into the chuck and also
  allows high regrinding limit.

7
Double Rare Earth Round Chuck

• The MPI Double Rare Earth Round Chuck is
  primarily designed for turning and grinding round
  and ring-shaped workpieces. The top plate with
  radial poles offers the possibility to machine
  the front, inner and outer diameter of the
  workpiece in one operation.

8
Double-Ceramic-Round-Chuck

• Due to its high holding force and watertight top
  plate, the MPI Double Ceramic Round Chuck is an
  indispensable tool during workpiece turning and
  circular grinding. The relatively small pole
  pitch and a low magnetic field make it suitable
  for thinner workpieces from 0.3 in or from 0.5 in
  depending on the chuck diameter or pole pitch.

9

Pneumatic Switchable Permanent Magnet

• Whether milling, turning, drilling or grinding,
  MPIs Pneumatic Switchable Permanent Magnet will
  hold your workpiece in place with a strength
  previously unattainable. This Workholding magnet
  delivers four to ten times the holding power of
  competitive products. Not only does it boast
  significantly better power, but it also houses
  this magnetic strength in an enclosure that is
  typically more than 50 smaller than other
  comparable units. Low-cost operation no
  electricity or hydraulics required to operate
  (pneumatic actuated)
• Extremely reliable life cycle tested to
  5,000,000 cycles to date
• The shear holding force is 3X7X stronger than
  competitors electromagnet
• Shear force is comparable to hydraulically
  switched magnets, but without the complexity
• Results in increased productivity and quality
  reducing rejected parts
• Top clamping mass enhancers not required.

10
Workholding Magnetic Chucks
11
   Contact Us
   Contact Us
Business Name MPI Magnetic Products, Inc.
Business Email info_at_mpimagnet.com Business
Address 683 Town Center Drive, Highland, MI
48356 Michigan Contact Number 248.887.5600
Website URL https//mpimagnet.com/