STAY WARM THIS WINTER WITH A MULTI-HEAD SPLIT SYSTEM

1
STAY WARM THIS WINTER WITH A MULTI-HEAD SPLIT
SYSTEM
2

• For most of us, summoning the will to get out of
  bed in the morning can only be achieved because
  theres a job waiting for us that has to be done.
  This might be working in an office, on a building
  site or getting the kids to school.

3

• Given the choice, when that alarm goes off
  before the sun has begun to warm things up, most
  of us would much rather stay nice and warm in bed
  during a Melbourne winter than face the bitter
  cold.

4

• Melbourne in the middle of winter July is
  particularly unpleasant in the early mornings (if
  you dont like the cold!). Often, if it is not
  drizzling theres a bite to the wind that blows
  through the city that seems to reach through
  every layer of clothing.

5

• While it is unfortunate that we all have to get
  out of bed at some stage to brave these brutal
  Melbourne winter mornings, theres a practical
  solution for warming your home that will make
  things a little easier a multi head split system.

6

• A Multi head split system, sometimes just called
  multi split systems consist of a primary
  outdoor unit and multiple indoor units that drive
  the ambient temperatures of a room. This system
  allows for each room with a secondary unit
  (controlled by the primary one) to moderate
  individual temperatures of that specific room.

7

• This means is that a bedroom can be kept a
  comfortable 15 degrees overnight, but the living
  areas slightly warmer. This makes the overall
  living environment of a home or office much more
  comfortable during the middle of winter.

8

• A multi head split system setup is a similar to
  a wall-hung system. The latter does not operate
  using an outdoor primary controller, so the main
  difference is that the workflow is split into
  the condenser unit (the primary unit) and the
  internal units for a multi head split system.

9

• With the cooling setting applied, warm air is
  removed from the room by the internal unit and
  cooler air recirculated back in its place. When
  the heater setting is functioning, the opposite
  takes place.

10

• It is possible to have many internal units up
  to 9 controlled by the one primary unit. This
  depends on the make and model of the multi head
  split system you are installing. Our expert team
  will be able to guide you on the best system for
  your home or office requirements.

11

• Multi split systems are best suited for spaces
  that have low ceilings, or a limited ability to
  create a ducted network to heat or cool a given
  area. They are also often more cost-effective
  than a conventional ducted system making them
  ideal for larger rooms or office spaces.

12

• Contact our expert team for the most
  cost-effective multi head split system for your
  home or office that will keep you warm in summer
  and warm in winter.